Related Documentation; Data Dump Mode - Epson ActionLaser 1600 User Manual

2. Gently pull out the paper. The direction you should pull
depends on where the paper is jammed. If it tears, make
sure you remove any pieces remaining in the printer.
Note:
Because the toner on the paper inside theprinter may not have
been fixed on the page, toner may come off on your hands when
you remove thepaper. If you spill toner on your clothing, rinse
it off with cold water. Using hot water may leave a permanent
stain
3. Reinstall the imaging cartridge.
4. Close the printer cover.
After a paper jam, the jammed page is automatically
reprinted

Data Dump Mode

The data dump mode is a special feature that makes it easy
for experienced users to find the cause of communication
problems between the printer and computer. The data dump
mode produces an exact printout of the codes reaching the
printer.
1. Make sure that the printer is loaded with paper and turned
off.
2. Hold down the On Line button while you turn on the
printer. Make sure you hold the button down until the
DUMP MODE appears on the display.
3. Run any program that causes the printer to print (either an
application program or a program written in any
programming language). Your printer prints out all of the
codes sent to it in hexadecimal format.
4. To stop printing and turn off data dump mode, press the
On Line button to go off line. Then turn off the printer
after printing stops.
Laser Printers
Information Reference List
Engineering Change Notices
None.
Product Support Bulletins
None.
Technical Information Bulletins
None.

Related Documentation

TM-AL1600 ActionLaser 1600 Service Manual
PL-AL1600 ActionLaser 1600 Parts Price List
4002596 ActionLaser 1600 Reference Guide
4002595 ActionLaser 1600 Read This First Guide
5/10/94
EPSON ActionLaser 1600
AL1600-9