User Guide Contents Overview .............. 1 Getting Started ............. 2 Unpacking myPower for iPhone 4 ....2 Getting to Know myPower for iPhone 4 .... 3 Using myPower for iPhone 4 ......... 4 Adhering myGuard Protector ......4 ™ Placing Your iPhone 4 into the Battery Case ..5 Removing Your iPhone 4 from the Battery Case ..7 Viewing the Battery Capacity ......
Overview myPower for iPhone 4, the ultra slim ™ ® rechargeable battery case for iPhone 4, lets you talk, rock, view, share, and stay connected longer. This compact battery case doubles as a dock for automatic syncing, and as a case to protect your iPhone 4 from everyday wear and tear.
Getting Started Unpacking myPower for iPhone 4 Your myPower for iPhone 4 package includes the following: User guide (not shown) myGuard protector set (not shown) ™ myPower for iPhone 4 Micro USB cable MP1280...
Getting to Know myPower for iPhone 4 Raised edge for iPhone 4 surface protection Replaceable battery module Control module On/off switch preserves power Micro USB port for charging and automatic Capacity indicator syncing shows remaining power at a glance USER GUIDE...
Using myPower for iPhone 4 Use myPower for iPhone 4 to power your iPhone 4, or to charge your iPhone 4 while connected to external power. myPower for iPhone 4 bypasses the iPhone 4 battery to power (not charge) your iPhone 4, thus extending the overall life of the iPhone 4 battery.
4. This will prevent any scratches on the back when the iPhone 4 is in or out of our battery case. Additional myGuard protectors are available online at www.tekkeon.com. 1. Ensure that your iPhone 4 is free of dust. 2. Holding the red label , peel the first backing from the myGuard protector.
Page 8
3. Slide the battery module down over your iPhone 4 until it snaps into place. 4. When you’re ready to use the battery, slide the On/Off switch to the On position (to the right). The battery icon on your iPhone 4 will change to to indicate your iPhone 4 is being externally powered.
Removing Your iPhone 4 from the Battery Case 1. Gently pull the battery module from the control module to separate the two pieces. 2. Slide your iPhone 4 away from the 30-pin connector in the control module. 3. To store myPower for iPhone 4, slide the battery module onto the control module until it snaps into place or store the two pieces separately.
Page 10
1. With or without your iPhone 4 inserted in the battery case, connect the micro USB connector to the micro USB port on myPower for iPhone 4. 2. Connect the USB connector to a wall outlet using a USB power adapter or to a computer USB port.
Note: If you are charging iPhone 4 at the same time, you must use an iPhone 4-compliant USB adapter. Syncing Your iPhone 4 The intelligent design of myPower for iPhone 4 enables you to sync your iPhone 4 while charging it via a USB port on your computer. 1.
Prolonging Battery Life Extreme heat and cold will affect your battery’s performance. At temperatures above 80°F (27°C), the battery will discharge more quickly, and in colder temperatures, the battery won’t charge well. Therefore, it is recommended that the battery is used at room temperature, or between 68°F to 77°F (20°C to 25°C), and is not used in temperatures outside the range of temperatures between 32°F to 104°F (0°C to...
Ultra Power battery which more than doubles your work or play time on your iPhone 4. 1. With the iPhone 4 in the battery case, gently pull the battery module from the control module and iPhone 4. 2. Slide the new battery module down over your iPhone 4 until it snaps into place.
Accessories The following accessories for myPower for iPhone 4 can be ordered at the Tekkeon online store at www.tekkeon.com: Ultra Slim Replaceable Battery MP1280-12 Ultra Power Replaceable Battery MP1280-22 myCharger USB Power Adapter MP1650-40 Safety Precautions Do not shake, drop, or throw the battery.
This war- ranty is limited to replacement only and shall not cover any other damages. Any product returned to Tekkeon, Inc. with no fault found will be returned to the owner at the owner’s expense. To obtain warranty coverage, please complete and submit the enclosed registration card.
Need help?
Do you have a question about the myPower MP1280 and is the answer not in the manual?
Questions and answers