Page 1
9101443100 » 302@# Double Auto Reverse Cassette Deck OWNER’S MANUAL CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT Ü REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert ÿ...
(including amplifiers) supporting structure, grounding of the lead-in wire to an antenna discharge that produce heat. unit, size of grounding conductors, location of antenna-discharge unit, con- nection to grounding electrodes, and requirements for the grounding elec- trode. TASCAM 302MKII...
Before Getting Started The TASCAM 302MKII is a double auto reverse Rack Mounting cassette deck primarily designed for continuous The 302MKII can be installed in a standard 19" rack, playback of background music or tape dubbing needs. using the provided 4 pairs of screws (M5 x 12) and 4 A maximum of ten 302MKIIs can be hooked up to washers, as shown.
PHONES OUT switch : Selects a headphone monitor source. Set to 1 for monitoring tape signals REC BAL knob : Used to balance the left and from deck 1, 2 for monitoring tape signals from right input levels. TASCAM 302MKII...
Page 7
INPUT controls : Adjust record level for the individual deck 1 and deck 2. SLV/MSTR switch : Normally, leave this switch OFF. Only when dubbing a tape onto, or recording from an external single source on multiple units, select SLV or MSTR. TASCAM 302MKII...
Record Ready mode. All the other controls on the remote are duplicates of the corresponding controls on the main unit. NOTE The remote unit is powered from the main unit. Don’t attempt to open the lid on the remote unit. TASCAM 302MKII...
6. If you intend to record on both deck 1 and deck 2 counting a blank space of 4 seconds or more between simultaneously, press the button. Its DUAL REC programs. LED will turn on and both decks will go into Record Ready mode. TASCAM 302MKII...
(STOP can also operate but only serves to deck 1, deck 2 invariably goes into Record Pause disengage the dubbing mode). mode. 5. If you have connected a monitor speaker system to the output of deck 1, and have selected the HI TASCAM 302MKII...
2 automatically starts playing. When deck 2 plays up to the end af the reverse 3. Insert the tapes into both decks. side, deck 1 again starts playing. This process continues until you press on either deck. STOP TASCAM 302MKII...
Erasing Recordings Turn the control all the way to the left and put INPUT the deck into Record mode. To erase the entire tape (except metal tapes), we recommend that you use the optional TEAC bulk eraser device. TASCAM 302MKII...
Multiple-Unit System Operation A maximum of ten compatible units (TASCAM 322 or “ Dubbing onto multipie cassettes simultaneously. 302MkII) can be interconnected to provide the “ Recording an external source onto multiple following possibilities : cassettes simultaneously. “ Sequential link play of multiple cassettes.
LED on all the slaves will start blinking. slaves into which no tape is inserted. 5. If the reverse PLAY LED is blinking on any slaves, press the Á button on deck 2 of the master unit. TASCAM 302MKII...
This puts all the slaves into Record Ready mode. 5. Insert cassette tapes into deck 2 of the master unit and decks 1 and 2 of the slaves. Suggestion: There is no problem if there are slaves into which no tape is inserted. TASCAM 302MKII...
Page 16
2 of the master to put all the decks into Record Ready mode. 13. Press the Ó button on deck 2 of the master so that all the tapes are ready for recording on their reverse sides. TASCAM 302MKII...
Slowly move in to the tape path. Move the degausser slowly back and forth, touching lightly all metal parts in the tape path. Slowly move it away again to at least 1 m (3 feet) from the recorder before turning if off. TASCAM 302MKII...
: Display Problem Solution Commands interrupted somewhere Make settings coherent throughout the Err2 because of incoherent switch settings system. Err3 Incorrect EXT CONTROL connection Correct connection. TASCAM 302MKII...
Specifications and features subject to change Reference Record Level : without notice or obligation. 250 nWb/m = 0 VU (315 Hz) (JEITA) EXT CONTROL : 3.5 mm mini jack 2.5 mm mini-mini REMOTE IN (FROM RC-322A) : jack Dimensional Drawings TASCAM 302MKII...