Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Targus Voice Recording Presenter with Laser Pointer
Summary of Contents for Targus Voice Recording Presenter with Laser Pointer
- Page 1 Voice Recording Presenter with Laser Pointer USER GUIDE Visit our Website at www.targus.com Features and specifications subject to change without notice. © 2006 Targus Group International, Inc. and Targus, Inc. AMP05US/ 410-0705-001A...
- Page 2 AVOID EXPOSURE--HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS APERTURE. LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES.
-
Page 3: Targus Voice Recording Presenter With Laser Pointer
PRESENTER WITH LASER POINTER Introduction Congratulations on your purchase of the Targus Voice Recording presenter with Laser Pointer. This user’s guide describes how to connect the presenter to your computer and its functions. This 2.4GHz presenter can work up to 50 ft (15m) of operating range and... -
Page 4: Using The Presenter
Targus Voice Recording presenter with Laser Pointer Using the presenter Q1 / Q2 L. Bulit-in SD Card Reader A. Application Switch M. Connection Button B. Next Page N. USB Receiver C. Laser Button O. Battery Compartment D. Microphone (recording) P. USB (mini-B) Cable Connector E. -
Page 5: Installing The Batteries
Targus Voice Recording presenter with Laser Pointer Installing the Batteries • Before you start, please install the 2 AAA batteries (supplied). • Open the battery cover located on the back of the presenter and insert the batteries according to the correct polarities. - Page 6 Targus Voice Recording presenter with Laser Pointer To Reconnect the Device and the Receiver Position the Power Switch to “Presenter” mode to turn on the presenter. This presenter is a plug and play device and should work once the USB receiver is connected to and recognised by the computer.
- Page 7 When the SD card is full, the LED under the recording button will flash twice per second and the recording will stop functioning. If the presenter is low in battery, the LED under the Targus logo will flash continuously until the power is completely out.This is an indication that there’s only enough power for approximately 30 minutes (depending on the usage) -- you should replace the batteries now.
-
Page 8: Safety Measures
Targus Voice Recording presenter with Laser Pointer The voice data files are saved as .WAV format. You can copy the files to your computer or delete the files in the SD card. To retrieve or playback voice data file from the computer Once you have located the voice data file, the recorded data can be playback with audio programs that supports .WAV file format. -
Page 9: Warranty
This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to a devices nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility. -
Page 10: Declaration Of Conformity
20 centimeters between the radiator and your body. Declaration of Conformity Hereby, Targus, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Need help?
Do you have a question about the Voice Recording Presenter with Laser Pointer and is the answer not in the manual?
Questions and answers