Technical Specifications; Cabinet Finish - Tannoy Reveal User Manual

5.0 TECHNICAL SPECIFICATIONS

Loudspeaker
Frequency response (1)
Recommended amplifier power
Power handling
Nominal Impedance
Sensitivity (3)
Distortion
Crossover frequency
Cabinet
Drive unit
Low frequency design
Cabinet construction

Cabinet finish

Cabinet dimensions (HxWxD)
Cabinet weight
Shipping dimensions (HxWxD)
Shipping weight
NOTES : (1) +/- 3 dB , measured at 1m in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS426A.
(3) Averaged over specified bandwidth for half-space environment. For anechoic conditions the figure is to be decreased
by 3 dB.
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
65 Hz - 20 kHz
50 to 100 W rms into 8
Average (2) Programme
50 W rms 100 W rms
6
90 dB SPL / 1 W @ 1 m
< 0.8%
3000 Hz
Tannoy shielded 6.5" bass driver (1690)
Tannoy shielded 1" soft dome tweeter (1205)
Optimised bass-reflex load, in 12 litres
40mm MDF front baffle,
16 mm high density particle board.
Red satin finish front
Grey suedette vinyl sides and back
340 mm x 210 mm x 260 mm
7 kg
622 mm x 287mm x 440mm
16 kg