Symantec Veritas Storage Foundation HP-UX Installation Manual page 25

.
.
.
31 CONNWAIT
Note: The output lists 32 nodes. It reports on the two cluster nodes,
system01 and system02, plus non-existent nodes. For each correctly
configured system, the information shows a state of
link of , and an address for each link. However, in the example above, the
UP
output shows that for node system02, the private network may have failed,
or the information in /etc/llttab may be incorrect.
To obtain information about the ports open for LLT, type lltstat -p on
any system. In the following example, lltstat -p is typed on one system
in the cluster.
4 Log into system01.
# lltstat -p
Output resembles:
LLT port information:
Port Usage
0 gab
opens:
connects:
Note: The two systems with node ID's 0 and 1 are connected.
See "/etc/llthosts" on page 24.
Installing and configuring the product
Verifying the configuration files
lan1 DOWN
lan2 DOWN
Cookie
0x0
0 1 3 4 5 6 7 8 9 10 11 12 13...
0 1
, a status for each
OPEN
27