Capturing A Photo From A Movie (Nex-Vg30/Vg30H Only) - Sony Handycam NEX-VG30 Handbook


Notes
You cannot restore movies once they are

divided.
You cannot divide protected movie. Undo the

protection of the movie to divide it, before you
try to divide it (p. 52).
Do not remove the battery pack or the AC

Adaptor from your camcorder while dividing
the movie. It may damage the memory card.
Do not eject the memory card while dividing

movies on the memory card.
A slight difference may occur from the point

where you touch and the actual dividing
point, as your camcorder selects the dividing
point based on about half-second increments.
Only simple editing is available on the

camcorder. Use the supplied software
"PlayMemories Home" for more advanced
editing.
Capturing a photo from a movie
(NEX-VG30/VG30H only)
You can capture images from movies
recorded with your camcorder.
 [Photo Capture] that
 Touch
appears on the playback screen
of a movie.
The [Photo Capture] screen appears.

Touch , then touch
point where you want to capture
a photo.
The movie pauses.
 Touch
capturing point with more
precision.
 Touch
When capturing is finished, the screen
returns to pause.

Notes
The image size is fixed based on the image

quality of the movie. If the movie was recorded
with one of the following image quality levels,
the image size will be set as shown below.
High definition image quality (HD): 2.1 M

(16:9)
Wide aspect ratio (16:9) with standard

definition image quality (STD): 0.2 M (16:9)
4:3 aspect ratio with standard definition

image quality: 0.3 M (4:3)
The memory card where you want to save

photos should have enough free space.
at the
The recording date and time of captured photos

is the same as the recording date and time of
the movies.
If the movie you are capturing from has no data

code, the recording date and time of the photo
will be the date and time you captured from
the movie.
US

/ to adjust the
Returns to the beginning of the
selected movie
.