The Computer Won't Start - Epson Endeavor WG User Manual

Power-on diagnostics error messages (continued)
Error code
Hard disk drive(s)
and controller
1760
1761
1770
1771
1780
1781
1782
1790
1791
t . .
8602
8603

The Computer Won't Start

If your computer does not start when you turn on the power,
check the following:
1. Is the power light on? If not, remove any diskettes and turn
off the power. Make sure the power cord is securely
connected to both the AC inlet on the back panel and an
electrical outlet. Replace your main operating system
diskette or Reference diskette, if necessary, and turn on the
computer again.
Message
Disk 0 parameter failure
Disk 1 parameter failure
Disk 0 parameter error
Disk 1 parameter error
Disk 0 failure
Disk 1 failure
Disk controller failure
Disk 0 error
Disk 1 error
Auxiliary device failure
Auxiliary device reset failure
Auxiliary device interrupt
failure
Action
See "Hard Disk
Drive Problems"
See 'Mouse
Problems"
Troubleshooting 6-5