Exiting The Setup Program; Post-Setup Procedures - Epson EL 3S/33 User Manual

Exiting the SETUP Program

When you leave the SETUP program, you can save your
settings and reboot your system, or exit SETUP without saving
your settings. You can also return all values to the factory
defaults.
To leave the SETUP program, press Esc from any SETUP
screen. From the SETUP exit menu, press these keys to perform
the following functions:
Returns to the SETUP utility
Esc
Saves the changes you have made to your configuration
F4
and restarts your computer
Supplies the factory default values for all SETUP options
F5
Exits the SETUP utility and returns to the system prompt
F6
without saving any changes.

Post-SETUP Procedures

After you run SETUP for the first time, you may need to install
the operating system on your computer. See your operating
system manual for instructions.
Also, install any software you plan to use. See your application
program manuals for instructions.
You may also want to install the optional extended video
drivers for some of your application programs. See Chapter 5
for more information.
1-18 Setting Up Your System