Sun Microsystems Solaris 7 User Manual page 24

3. At the ok prompt, type:
ok show-nets
The show-nets command lists the system devices. You should see the full path
name of the network device, similar to the examples below.
For Sun GigabitEthernet/P:
a) /pci@1f,0/pci@1/network@3
b) /pci@1f,0/pci@1,1/network@1,1
q) NO SELECTION
Enter Selection, q to quit:
For Sun GigabitEthernet/S:
a) /sbus@1f,0/network@1,100000
b) /sbus@1f,0/SUNW,hme@e,8c00000
q) NO SELECTION
Enter Selection, q to quit:
4. At the ok prompt, type
For Sun GigabitEthernet/P:
ok boot /pci@1f,0/pci@1/network@3
For Sun GigabitEthernet/S:
ok boot /sbus@1f,0/network@1,100000
5. Proceed with the OS installation according to the instructions provided with your
Solaris CD.
20 Platform Notes: The Sun GigabitEthernet Device Driver • March 1999
full path name of the network device.
boot