Operational Mode Parameters - Sun Microsystems Solaris 7 User Manual

TABLE 5
TABLE 5
Parameter
lance_mode
ipg0

Operational Mode Parameters

TABLE 6
TABLE 6
Parameter
adv_1000autoneg_cap
adv_1000fdx_cap
adv_1000hdx_cap
adv_pauseTX
adv_pauseRX
8 Platform Notes: The Sun GigabitEthernet Device Driver • March 1999
defines the lance_mode and ipg0 parameters.
Parameters Defining lance_mode and ipg0
Values and Descriptions
0 = lance_mode disabled
1 = lance_mode enabled (default)
0 to 30 = Additional IPG before transmitting
a packet (after receiving a packet)
describes the operational mode parameters and their default values.
Operational Mode Parameters
Values and Description
Local PCS capability advertised by the hardware
0 = Forced mode
1 = Autonegotiation (default)
Local PCS capability advertised by the hardware
0 = Not 1000 Mbits/sec full duplex capable
1 = 1000 Mbits/sec full duplex capable (default)
Local PCS capability advertised by the hardware
0 = Not 1000 Mbits/sec half duplex capable
1 = 1000 Mbits/sec half duplex capable (default)
Local PCS capability advertised by the hardware
0 = Not Pause TX capable (default)
1 = Pause TX capable
Local PCS capability advertised by the hardware
0 = Not Pause RX capable
1 = Pause RX capable (default)