Exposure Compensation - Sony FCB-H11 Technical Manual

rest should be set to 20%. The range of the Spot AE
frame is fixed to 5 blocks vertically and 4 blocks
horizontally.
0 1 2 3 4 5 6 7 8 9 A B C D E F
0
1
2
3
Vertical 16
4
5
6
7
8
9
A
B
C
D
E
F

Exposure Compensation

Exposure compensation is a function which offsets the
internal reference brightness level used in the AE
mode by steps of 1.5 dB.
EXPOSURE Comp
Value
0E +10.5dB
0D +9dB
0C +7.5dB
0B +6dB
0A +4.5dB
09 +3dB
08 +1.5dB
07 0dB
06 –1.5dB
05 –3dB
04 –4.5dB
03 –6dB
02 –7.5dB
01 –9dB
00 –10.5dB
Aperture Control
Aperture control is a function which adjusts the
enhancement of the edges of objects in the picture.
There are 16 levels of adjustment, starting from "no
enhancement." When shooting text, this control may
help by making the text sharper.
Horizontal 16
(8,8)
Step
+7
+6
+5
+4
+3
+2
+1
0
–1
–2
–3
–4
–5
–6
–7
Back Light Compensation
When the background of the subject is too bright, or
when the subject is too dark due to shooting in the AE
mode, back light compensation will make the subject
appear clearer.
ICR (IR Cut-Removable) Mode
An infrared (IR) Cut-Filter can be disengaged from the
image path for increased sensitivity in low light
environments. The ICR will automatically engage
depending on the ambient light, allowing the camera to
be effective in day/night environments.
When the auto ICR mode is set to ON, the image
becomes black and white.
Auto ICR Mode
Auto ICR Mode automatically switches the settings
needed for attaching or removing the IR Cut Filter.
With a set level of darkness, the IR Cut Filter is
automatically disabled (ICR ON), and the infrared
sensitivity is increased. With a set level of brightness,
the IR Cut Filter is automatically enabled (ICR OFF).
Also, on systems equipped with an IR light, the
internal data of the camera is used to make the proper
decisions to avoid malfunctions.
Slow shutter – Auto/Manual
When set to "Auto," ensures that the slow shutter is set
automatically within the range of the lower limit set by
the slow shutter limit command, when the brightness
drops. Effective only when the AE mode is set to "Full
Auto."
Set to "Slow Shutter Auto" at shipment from the
factory.
Camera ID
The ID can be set up to 65,536 (0000 to FFFF). As this
will be memorized in the nonvolatile memory inside
the camera, data will be saved, regardless of the
"position preset."
Effect
It consists of the following functions.
• Neg. Art: Negative/Positive Reversal
• Black White: Monochrome Image
Basic Functions
10