A-3 Removing Memory Card Retaining Screw; A-1 Memory Card Jumper Settings - Epson EQUITY II+ User Manual

EPROM size. You can change the EPROM size jumper if you install a
different size of EPROM.
In all cases, make sure you need to alter the jumper settings for the
option you are installing before you change anything.
Table A-l shows the functions for the jumpers on the memory card.
1
A
B
B
Default setting
l
To access the memory card jumpers, you need to remove the card from
the main unit first:
1. Remove the retaining screw from the bracket on the memory card, as
shown in Figure A-3.
Figure A-3. Removing memory card retaining screw
User's Guide
Table A-1. Memory card jumper settings
3
A
A
B
A
B
Function
640KB *
512KB (disable upper 128KB)
256KB (disable upper 384KB)
Select EPROM size 27128*
Select EPROM size 27256