Table of Contents
Advertisement
Screen Options
■ Messages
Settings > Display > Messages
Turn this setting off if you want to prevent on-screen messages from appearing (such as
the no-signal message, or the identifying text that appears when you switch between
image sources or color modes).
■ Startup Screen
Settings > Display > Startup Screen
Turn this setting off if you want to prevent the startup screen from appearing while the
projector is warming up.
■ Display Background
Settings > Display > Display Background
Changes the screen that's used when the projector is not receiving a signal or when you
press the
button to temporarily stop projection.
Blank
Other Setup Options
■ Projection
Settings > Projection
You can select different options for projecting the image:
.
Rear/Ceiling
■ Direct Power On
Settings > Direct Power On
Sets projection to start when the main power switch is turned on, without pressing the
P power button on the remote control or the projector.
Note: When direct power on is enabled, power surges that occur after a power outage can
cause the projector to turn on.
■ Video Signal
Settings > Input Signal > Video Signal
Leave this setting on
NTSC or PAL (for standard TV formats).
so the projector can automatically interpret the format, such as
Auto
,
Front
Front/Ceiling
Making Detailed Adjustments
,
,
Rear
47
Hide quick links:
Advertisement
Table of Contents
