Deactivating The Flash - Canon POWERSHOT SX240 HS User Manual

Common, Convenient Features
When you specify multiple shots, image brightness and white balance are determined by the first shot. More time is required between shots when the flash
fires or when you have specified to take many shots. Shooting will stop
automatically when the memory card becomes full.
When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp wil! remain
lit in case the flash fires.)
Prepare the camera for shooting without the flash as follows.
Configure the setting.
Press the _, button, choose (_ (either press
the 4_ buttons ortum the _[ii_i_; dial), and then
press the Q button.
If the flash is already up, it will be lowered
automatically.
Once the setting is complete, (_ is displayed.
To restore the original setting, repeat this
process but choose _A.
(_) If a flashing _) icon is displayed when you press the shutter button
halfway in low-light conditions, mount the camera on a tripod or take
other measures to keep it still.
66