Hitachi CP-X467 Network Manual page 47

3.5 Manual configuration (continued)
Wired LAN
1) Enter the following information for the
projector. *1
IP address : 192.168.1.10 (example)
Subnet mask : 255.255.255.0 (example)
2) Click [Connect].
3) The network connection will be established.
Proceed to the item 3.6 Confirm the connection to your destination. (50)
*1 To find the network setting on the projector, refer to the NOTE. (40)
[trouble shooting]
n A network connection could not be established.
Windows prevented network configuration
changes.
You may log in the Windows under User
authority.
Click [OK], then the "Live Viewer 3" main
menu is displayed even though the network
is not established. Click
and go back to the item 3.3.3 Connecting to
the network. (31)
Consult to the network administrator. Log in the Windows under Administrator
authority. After that, please resume at the item 3.3.1 Starting the "Live Viewer
3". (26)
on the main menu
3. Using the Live Mode
47