Configuring and Controlling the Projector via a Web Browser
Projector Status
Displays and configures the current projector status.
Item
Error Status
Lamp Time
Filter Time
Power Status
Input Status
Blank On/Off
Mute
Freeze
Network Restart
Restarts the projector's network connection.
Item
Restart
NOTE
• Restarting requires you to re-logon in order to further control or configure
the projector via a web browser. Wait minute or more after clicking [Restart] button
to log on again in order to further control or configure the projector via a web browser.
• A link to the logon screen (6 : Fig. ) is displayed after restarting the
projector's network connection if the DHCP is set to ON.
Logoff
When [Logoff] is clicked, the logon screen is displayed (6 : Fig. ).
Displays the current error status.
Displays the usage time for the current lamp.
Displays the usage time for the current filter.
Displays the current power status.
Displays the current input signal source.
Displays the current Blank on/off status.
Displays the current Mute on/off status.
Displays the current Freeze status.
Restarts the projector's network connection in order to
activate new configuration settings.
Description
Description