Epson L-500V User Manual page 27

To take a picture with a frame:
1
Turn the Mode dial to
continuous.
2
Press the
the camera is displayed.
3
Select the frame you want by moving the joystick to
u or d, then press the
frame is displayed on the LCD screen. (If you stored
more frames on the memory card, move the joystick
to r to move to the memory card frames.)
Tip:
Most frames are available in both horizontal and vertical
designs. Make sure you choose the right orientation for
the picture you want to take.
4
Press the
button to zoom in on or out of your subject as
necessary.
5
Center your subject in the frame.
6
Press and hold the shutter button halfway. The focus
frame turns green and the focus is set.
7
Press the shutter button all the way down. The
camera beeps as it captures your picture. (For
continuous shooting, hold down the shutter button
and release it when you're finished.)
button. The first frame stored in
P.I.F.
OK
(telephoto) or the
T
automatic,
button. The selected
W
manual, or
(wide-angle)
27