13.Disengage belttensionrod(K)fromlocking
bracket(L).
14.Installbeltonto engineclutch pulley(M).
IMPORTANT: Check belt for proper routing
in all mowerpulleygrooves.
15.Engage belt tension rod (K) on locking
bracket(L).
9. Repeaton oppositesideof tractor.
10.Turn steering wheel to position wheels
straightforward.
11.AFfACH FRONT LINK (E) - Work from
left side of tractor.Insert rod end of link
assembly through front hole in tractor
front suspensionbracket (F) and secure
withretainerspring (G)throughhole inlink
locatedbehindthe bracket.
12. Insertotherendoflink (E)intohole infront
mowerbracket(H)andsecurewithwasher
and retainerspring(J).
_,CAUTION:
Belttension
rod is spring loaded.
Have a tight grip on rod and engage
slowly.
16. Raise attachment
lift lever to highest posi-
tion.
17. If necessary,
adjust gauge wheels
before
operating
mower as shown in the Opera-
tion section
of this manual.
02937
10