Page 1
700 Series Briggs & Stratton Engine Power-Propelled, Electric Start 22" Multi-Cut Model No. 917.374552 • EspaSol, p. 21 CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Sears Brands Management Corp., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website: www.sears.com/craftsman...
8-12 Repair Parts ........40-49 Maintenance Schedule ......Sears Service ......Back Cover CRAFTSMAN 2-YEAR FULL WARRANTY For TWO YEARS from the date of purchase, this product is warranted against any defects in material or workmanship. Defective product will receive free repair or replacement if repair is unavailable.
I. GENERAL OPERATION , Always wear safety goggles or safety glasses with side shields when operating , Read, understand, and follow all mower. instructions on the machine and in the manual(s) before starting. Be thoroughly II. SLOPE OPERATION familiar with the controls and the proper Slopes are a major factor related to slip &...
o Never fill containers inside a vehicle, on o Keep nuts and bolts, especially blade a truck or trailer bed with a plastic liner. attachment bolts, tight and keep equip- Always place containers on the ground ment in good condition. away from your vehicle before filling.
Repair Protection Agreements Congratulations on making a smart pur- Fast help by phone- phone sup- chase. Your new Craftsman® product is port from a Sears representative designed and manufactured for years of products requiring in-home repair, plus dependable operation. But like all prod- convenient repair scheduling.
Page 6
Read these instructions and this manual in HOW TO SET UP YOUR MOWER its entirety before you attempt to assemble TO UNFOLD HANDLE or operate your new lawn mower. IMPORTANT: Unfold handle carefully so IMPORTANT: This lawn mower is shipped as not to pinch or damage control cables.
TO ASSEMBLE GRASS CATCHER TO PREPARE BATTERY 1. Put grass catcher frame into grass bag NOTE: Your battery must be charged with rigid part of bag on the bottom. before you can start your lawn mower. Make sure the frame handle is outside 1.
Page 8
KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your lawn mower or in literature supplied with the product.
DRIVE CONTROL ADJUSTMENT The operation of any lawn SAFETVG'ASSES mower can result in foreign Over time, the drive control system may objectsthrowninto the eyes, become "loose", resulting in decreased which can result in severe speed. There is a turnbuckle on the drive eye damage.
Page 10
TO CONVERT MOWER Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging: REAR BAGGING , Lift rear door of the lawn mower and Unlock place the grass catcher frame hooks latch onto the grass bag brackets.
TO EMPTY GRASS CATCHER ,A CAUTION: Wipe off any spilled oil or Empty the grass catcher when clippings fuel. Do not store, spill or use gasoline are visible in the full bag indicator window. near an open flame. ,A CAUTION: Alcohol blended fuels 1.
Page 12
MULCHING MOWING TiPS MOWING TIPS _i, CAUTION: Do not use de-thatcher IMPORTANT: For best performance, blade attachments on your mower. Such keep mower housing free of built-up attachments are hazardous, will damage grass and trash. See "CLEANING" in the your mower and could void your warranty. Maintenance section of this manual.
MAINTENANCE BEFORE AFTER EVERY EVERY EVERY BEFORE EACH EACH 25HOURS STORAGE SCHEDULE USE USE HOURS OR SEASON HOURS Check for Loose Fasteners 1_ # lean /Inspect Grass Catcher * Check Tires Check Drive Wheels v" Clean Lawn Mower ..M Clean under Drive Cover *** O Check Drive Belt / Pulleys *** W Check / Sharpen / Replace Blade Lubrication...
Page 14
5. Install the blade bolt with the lock LAWN MOWER washer and hardened washer into Always observe safety rules when per- blade adapter and crankshaft. forming any maintenance. 6. Use block of wood between blade and TIRES lawn mower housing and tighten the o Keep tires free of gasoline, oil, or insect blade bolt, turning clockwise.
Page 15
GRASS CATCHER Remove engine oil cap; lay aside on a clean surface. o The grass catcher may be hosed with water, but must be dry when used. Tip lawn mower on its side as shown and drain oil into a suitable container. o Check your grass catcher often for dam- Rock lawn mower back and forth to re- age or deterioration.
Page 16
Back plate NOTE: Water, grass and other debris will drain from beneath the mower housing during the washout process. 2. Remove grass catcher and discharge chute assembly from lawn mower. 3. Close mulcher door (if equipped). 4. Connect a garden hose to the fitting where shown.
Page 17
,_, WARNING: To avoid serious injury, before performing any service and adjustments: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
Page 18
ENGINE to suspected carburetor problems, take your lawn mower to a Sears or other ENGINE SPEED qualified service center for repair and/or Your engine speed has been factory set. adjustment. Do not attempt to increase engine speed IMPORTANT: Never tamper with the or it may result in personal injury.
ENGINE CYLINDER FUEL SYSTEM 1. Remove spark plug. 2. Pour one ounce (29 ml) of oil through IMPORTANT: It is important to prevent spark plug hole into cylinder. gum deposits from forming in essential fuel 3. Pull starter handle slowly a few times system parts such as carburetor, fuel filter, to distribute oil.
Page 20
TROUBLESHOOTING - See appropriate section in manual unless directed to a Sears Parts & Repair Center. CAUSE PROBLEM CORRECTION Loss of power 1. Rear of mower housing or 1. Raise cutting height. blade dragging in grass. 2. Cutting too much grass. Raise cutting height.
Page 21
Para conocer los detalles de la cobertura de la garantia con el fin de obtener una reparaci6n o un reemplazo en forma gratuita, visite el sitio web: www.craftsman.com Esta garantia SOLO cubre defectos de material y mano de obra. La cobertura de la garantia NO incluye: •...
Page 22
I. OPERACION • Siempre use gafas de seguridad o anteojos con protecci6n lateral cuando opere la sega- • Antes de empezar, debe familiarizarse dora. completamente con los controles y el uso correcto de la maquina. Para esto, debe leer y comprender todas las instrucciones II.
Page 23
• Nunca repostar la m_.quina al interior de un • Mantenga las tuercas y los pernos, espe- local. cialmente los pernos del accesorio de la • Nunca guardar la m_.quina o el contenedor cuchilla, apretados y mantenga el equipo en buenas condiciones.
Reparacion Congratulaciones por su buena compra. • Ayuda rapida pot telefono - soporte tele- nuevo producto Craftsman® estb. diseflado f6nico por parte de un representante Sears y fabricado para funcionar de modo fiable pot sobre productos que requieren un arreglo en muchos aflos.
Page 25
COMO PREPARAR SU SEGADORA Lea estas instrucciones y este manual comple- tamente antes de tratar de montar u operar su PARA DESDOBLAR EL MANGO segadora nueva. IMPORTANTE: Despliegue el mango con IMPORTANTE: Este cortacesped viene SIN mucho cuidado para no pellizcar o daflar los ACEITE O GASOLINA en el motor.
Page 26
PARA PREPARAR LA BATERJA PARA MONTAR EL RECOGEDOR Co:SPED AVlSO: Su bateria tiene que estar cargada an- Ponga el bastidor del recogedor de cesped tes de que pueda hacer arrancar su segadora. en la bolsa del cesped con la parte rigida 1.
Page 27
FAiVllLIARICESE CON SU SEGADORA LEA ESTE MANUAL DEL DUENO Y LAS REGLAS DE SEGURIDADANTES DE OPARAR SU SEGADORA. Compare las ilustraciones con su segadora para familiarizarse con la ubicaci6n de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Estos simbolos pueden apareser sobre su segadora o en la literatura proporcionada...
Page 28
AJUSTE DEL MANDO Laoperaci6n decualquier Ocasionalmente, el sistema de mando puede segadora puedehacerque SEGURIDAD "aflojarse', provocando una disminuci6n de la saltenobjetosextraflos dentrode susojos,Ioquepuedeproducir velocidad. Hay un torniquete en la sede del mando para apretar la tensi6n del cable. Pro- daflosgravesenestos.Siempre ceder de la siguiente manera: useanteojos deseguridad o protecci6n para 1.
Page 29
PARA CONVERTIR LA SEGADORA Su segadora fue enviada lista para usarse como acolchadora de capa vegetal. Para convertifla a una operaci6n de ensacado o de descarga: SEGADORAS CON DESCARGA TRASERA • Levantar la puerta trasera de cortacesped y colocar los ganchos del armaz6n de la recolectora de hierba en los soporte del recogedor de cesped.
Page 30
PARA VAClAR EL RECOGEDOR Use gasolina regular, sin plomo, nueva y lim- CESPED pia con el minimo de 87 octanos. No mezcle el aceite con la gasolina. Para asegurar Vacie el recogedor de cesped cuando los recortes son visibles en la ventana Ilena del que la gasolina utilizada sea fresca compre indicador de bolsa liana.
Page 31
Para comenzar el motor sandio el arrancador CONSEJOS PARA SEGAR Y ACOL- de soga, sujete la barra de controles que CHAR exigen la presencia del operador abajo en el IMPORTANTE: Para obtener el mejor mango y tire el mango del arrancador rb.pida- rendimiento mantenga la caja de la segadora mente.
Page 32
PROGRAMA ANTES DESPUES CADA CADA CADA ANTES DEL DE CADA DE CADA 25 HORAS O ALMACE= MANTEN|M|ENTO HORAS TEIVIPORADA HORAS NAIVIIENTO Revisar si hay Sujetadores Sueltos Limpiar/Inspeccionar el Recogedor de Cesped * Controlar los Neumaticos Controlar las Ruedas Motrices _1_ Limpiar la Segadora ..
Page 33
SEGADORA 5. Instale el perno de la cuchilla con la arandela de seguridad y la arandela endurecida en el Siempre observe las reglas de seguridad cu- adaptador de la cuchilla y el cigueSal. ando haga el mantenimiento. 6. Use un bloque de madera entre la cuchilla LLANTAS y la caja de la segadora y apriete el perno •...
Page 34
RECOGEDOR DE CESPED Remueva ia tapa del dep6sito del aceite; • El recogedor de cesped puede ser rociado dejela a un lado en una superficie iimpia. con el agua de la manguera pero tiene que Incline ia cortadora de cesped por este estar seco cuando se vaya a usar.
Page 35
Labio Plancha trasera Mueva el cortacespedes de cesped a un Area de la hierba cortada o de otra superfi- cie dura. NOTA: El agua, la hierba y la otra ruina escur- rirb.n debajo de la cubierta del cortacespedes durante el proceso del derrubio. Quite el colector de la hierba y descargue el montaje del canal inclinado del cortaces- pedes de cesped.
Page 36
_bADVERTENClA: Para evitar lesi6nes serias, antes de dar calquier servico o de hacer ajustes: Suelte la barra de control y pare el motor. AsegOrese que la cuchilla y que todas las partes movibles se hayan detenido completamente. Desconecte el alambre de la buj[a y p6ngalo en donde no pueda entrar en contacto con esta. PARA CAMBIAR CORREA DE IMPULSION...
Page 37
MOTOR debido a problemas que se sospecha vienen del carburador, Ileve su segadora a contacto VELOCIDAD DEL MOTOR con su centro de servicio Sears o con un otto La velocidad del motor ha sido ajustada en centro de servicio cualificado para repararla y/o la fAbrica.
ACEITE DEL MOTOR MOTOR Drene el aceite (con el motor caliente) y cb.m- SISTEMA DE COMBUSTIBLE bielo con aceite de motor limpio. (Vea "MO- iMPORTANTE: Es importante evitar que TOR" en la secci6n de Mantenimento de este se formen depositos de coma en partes manual.) fundamentales del sistemade combustible...
Page 39
SOLUCION DE PROBLEMAS - Yea ia seccion apropiada en el manual amenos este dirigido a un centro de servico Sears. CAUSA PROBLEMA CORRECClON No arranca Cuchilla suelta o adaptador Apriete el perno de la cuchilla (continuado) de la cuchilla quebrado. cambie el adaptador de la cuchilla.
Page 40
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917,374552 _"...
Page 41
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917.374552 PART PART PART DESCRiPTiON DESCRiPTiON DESCRiPTiON 184576 Upper Handle Assembly 175735 Hinge Bracket Assembly - - - Engine, Briggs & Stratton, Model Number 128T05- (Includes Foam Grip) 419942X428 Discharge Deflector 438396...
Page 42
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917,374552 ..... 41 31 3415 \\\\...
Page 43
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917.374552 PART PART DESCRiPTiON DESCRIPTmON 434776 Drive Control Assembly 428781 Cover, Dust, Wheel (Includes Speed Selector and Cable 17000510 Screw, Hex Head 1/4-20 x 1/2 426260X428 Cover, Top 404845 Pawl, Drive 406262...
Page 47
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 128T05=1268=B1 121 CARBURETOR OVERHAUL 104 _ 127 _ 163 6 276CW) 633 _# 358 ENGINE GASKET SET 20_;_ 177 ,_ bp 163 _ 524 _ 883 i _ _ 1095 VALVE GASKET SET Engine Power Rating Information The gross power rating for individual gas engine models is labeled in accordance with SAE (So- ciety of Automo-tive...
Page 48
BRIGGS & STRATTON 4=CYCLE ENGINE MODEL NUMBER 128T05=1268=B1 PART PART DESCRIPTION DESCRIPTION 697322 Cylinder Assembly 797306 Rod-Connecting (Used After 399269 Kit-Bushing / Seal Code Date 09041600). (Magneto Side) 499424 Rod-Connecting 299819s Seal-Oil (Magneto Side) (Used Before Code Date 493279 Sump-Engine 09041700).
NEED MORE HELP? Y@Jll fir@ the answer and more on _anagemyhOmeoCOm _ for free! o Find this and a[[ your other product manuals online. o Get answers from our team of home experts. o Get a personalized maintenance plan for your home. o Find information and tools to help with home projects.
Page 53
700 Series Briggs & Stratton Engine Power-Propelled, Electric Start 22" Multi-Cut Model No. 917.374552 • EspaSol, p. 21 CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Sears Brands Management Corp., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website: www.sears.com/craftsman...
Page 54
8-12 Repair Parts ........40-49 Maintenance Schedule ......Sears Service ......Back Cover CRAFTSMAN 2-YEAR FULL WARRANTY For TWO YEARS from the date of purchase, this product is warranted against any defects in material or workmanship. Defective product will receive free repair or replacement if repair is unavailable.
Page 55
I. GENERAL OPERATION , Always wear safety goggles or safety glasses with side shields when operating , Read, understand, and follow all mower. instructions on the machine and in the manual(s) before starting. Be thoroughly II. SLOPE OPERATION familiar with the controls and the proper Slopes are a major factor related to slip &...
Page 56
o Never fill containers inside a vehicle, on o Keep nuts and bolts, especially blade a truck or trailer bed with a plastic liner. attachment bolts, tight and keep equip- Always place containers on the ground ment in good condition. away from your vehicle before filling.
Page 57
Repair Protection Agreements Congratulations on making a smart pur- Fast help by phone- phone sup- chase. Your new Craftsman® product is port from a Sears representative designed and manufactured for years of products requiring in-home repair, plus dependable operation. But like all prod- convenient repair scheduling.
Page 58
Read these instructions and this manual in HOW TO SET UP YOUR MOWER its entirety before you attempt to assemble TO UNFOLD HANDLE or operate your new lawn mower. IMPORTANT: Unfold handle carefully so IMPORTANT: This lawn mower is shipped as not to pinch or damage control cables.
Page 59
TO ASSEMBLE GRASS CATCHER TO PREPARE BATTERY 1. Put grass catcher frame into grass bag NOTE: Your battery must be charged with rigid part of bag on the bottom. before you can start your lawn mower. Make sure the frame handle is outside 1.
Page 60
KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your lawn mower or in literature supplied with the product.
Page 61
DRIVE CONTROL ADJUSTMENT The operation of any lawn SAFETVG'ASSES mower can result in foreign Over time, the drive control system may objectsthrowninto the eyes, become "loose", resulting in decreased which can result in severe speed. There is a turnbuckle on the drive eye damage.
Page 62
TO CONVERT MOWER Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging: REAR BAGGING , Lift rear door of the lawn mower and Unlock place the grass catcher frame hooks latch onto the grass bag brackets.
Page 63
TO EMPTY GRASS CATCHER ,A CAUTION: Wipe off any spilled oil or Empty the grass catcher when clippings fuel. Do not store, spill or use gasoline are visible in the full bag indicator window. near an open flame. ,A CAUTION: Alcohol blended fuels 1.
Page 64
MULCHING MOWING TiPS MOWING TIPS _i, CAUTION: Do not use de-thatcher IMPORTANT: For best performance, blade attachments on your mower. Such keep mower housing free of built-up attachments are hazardous, will damage grass and trash. See "CLEANING" in the your mower and could void your warranty. Maintenance section of this manual.
Page 65
MAINTENANCE BEFORE AFTER EVERY EVERY EVERY BEFORE EACH EACH 25HOURS STORAGE SCHEDULE USE USE HOURS OR SEASON HOURS Check for Loose Fasteners 1_ # lean /Inspect Grass Catcher * Check Tires Check Drive Wheels v" Clean Lawn Mower ..M Clean under Drive Cover *** O Check Drive Belt / Pulleys *** W Check / Sharpen / Replace Blade Lubrication...
Page 66
5. Install the blade bolt with the lock LAWN MOWER washer and hardened washer into Always observe safety rules when per- blade adapter and crankshaft. forming any maintenance. 6. Use block of wood between blade and TIRES lawn mower housing and tighten the o Keep tires free of gasoline, oil, or insect blade bolt, turning clockwise.
Page 67
GRASS CATCHER Remove engine oil cap; lay aside on a clean surface. o The grass catcher may be hosed with water, but must be dry when used. Tip lawn mower on its side as shown and drain oil into a suitable container. o Check your grass catcher often for dam- Rock lawn mower back and forth to re- age or deterioration.
Page 68
Back plate NOTE: Water, grass and other debris will drain from beneath the mower housing during the washout process. 2. Remove grass catcher and discharge chute assembly from lawn mower. 3. Close mulcher door (if equipped). 4. Connect a garden hose to the fitting where shown.
Page 69
,_, WARNING: To avoid serious injury, before performing any service and adjustments: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
Page 70
ENGINE to suspected carburetor problems, take your lawn mower to a Sears or other ENGINE SPEED qualified service center for repair and/or Your engine speed has been factory set. adjustment. Do not attempt to increase engine speed IMPORTANT: Never tamper with the or it may result in personal injury.
ENGINE CYLINDER FUEL SYSTEM 1. Remove spark plug. 2. Pour one ounce (29 ml) of oil through IMPORTANT: It is important to prevent spark plug hole into cylinder. gum deposits from forming in essential fuel 3. Pull starter handle slowly a few times system parts such as carburetor, fuel filter, to distribute oil.
Page 72
TROUBLESHOOTING - See appropriate section in manual unless directed to a Sears Parts & Repair Center. CAUSE PROBLEM CORRECTION Loss of power 1. Rear of mower housing or 1. Raise cutting height. blade dragging in grass. 2. Cutting too much grass. Raise cutting height.
Page 73
Para conocer los detalles de la cobertura de la garantia con el fin de obtener una reparaci6n o un reemplazo en forma gratuita, visite el sitio web: www.craftsman.com Esta garantia SOLO cubre defectos de material y mano de obra. La cobertura de la garantia NO incluye: •...
Page 74
I. OPERACION • Siempre use gafas de seguridad o anteojos con protecci6n lateral cuando opere la sega- • Antes de empezar, debe familiarizarse dora. completamente con los controles y el uso correcto de la maquina. Para esto, debe leer y comprender todas las instrucciones II.
Page 75
• Nunca repostar la m_.quina al interior de un • Mantenga las tuercas y los pernos, espe- local. cialmente los pernos del accesorio de la • Nunca guardar la m_.quina o el contenedor cuchilla, apretados y mantenga el equipo en buenas condiciones.
Page 76
Reparacion Congratulaciones por su buena compra. • Ayuda rapida pot telefono - soporte tele- nuevo producto Craftsman® estb. diseflado f6nico por parte de un representante Sears y fabricado para funcionar de modo fiable pot sobre productos que requieren un arreglo en muchos aflos.
Page 77
COMO PREPARAR SU SEGADORA Lea estas instrucciones y este manual comple- tamente antes de tratar de montar u operar su PARA DESDOBLAR EL MANGO segadora nueva. IMPORTANTE: Despliegue el mango con IMPORTANTE: Este cortacesped viene SIN mucho cuidado para no pellizcar o daflar los ACEITE O GASOLINA en el motor.
Page 78
PARA PREPARAR LA BATERJA PARA MONTAR EL RECOGEDOR Co:SPED AVlSO: Su bateria tiene que estar cargada an- Ponga el bastidor del recogedor de cesped tes de que pueda hacer arrancar su segadora. en la bolsa del cesped con la parte rigida 1.
Page 79
FAiVllLIARICESE CON SU SEGADORA LEA ESTE MANUAL DEL DUENO Y LAS REGLAS DE SEGURIDADANTES DE OPARAR SU SEGADORA. Compare las ilustraciones con su segadora para familiarizarse con la ubicaci6n de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Estos simbolos pueden apareser sobre su segadora o en la literatura proporcionada...
Page 80
AJUSTE DEL MANDO Laoperaci6n decualquier Ocasionalmente, el sistema de mando puede segadora puedehacerque SEGURIDAD "aflojarse', provocando una disminuci6n de la saltenobjetosextraflos dentrode susojos,Ioquepuedeproducir velocidad. Hay un torniquete en la sede del mando para apretar la tensi6n del cable. Pro- daflosgravesenestos.Siempre ceder de la siguiente manera: useanteojos deseguridad o protecci6n para 1.
Page 81
PARA CONVERTIR LA SEGADORA Su segadora fue enviada lista para usarse como acolchadora de capa vegetal. Para convertifla a una operaci6n de ensacado o de descarga: SEGADORAS CON DESCARGA TRASERA • Levantar la puerta trasera de cortacesped y colocar los ganchos del armaz6n de la recolectora de hierba en los soporte del recogedor de cesped.
Page 82
PARA VAClAR EL RECOGEDOR Use gasolina regular, sin plomo, nueva y lim- CESPED pia con el minimo de 87 octanos. No mezcle el aceite con la gasolina. Para asegurar Vacie el recogedor de cesped cuando los recortes son visibles en la ventana Ilena del que la gasolina utilizada sea fresca compre indicador de bolsa liana.
Page 83
Para comenzar el motor sandio el arrancador CONSEJOS PARA SEGAR Y ACOL- de soga, sujete la barra de controles que CHAR exigen la presencia del operador abajo en el IMPORTANTE: Para obtener el mejor mango y tire el mango del arrancador rb.pida- rendimiento mantenga la caja de la segadora mente.
Page 84
PROGRAMA ANTES DESPUES CADA CADA CADA ANTES DEL DE CADA DE CADA 25 HORAS O ALMACE= MANTEN|M|ENTO HORAS TEIVIPORADA HORAS NAIVIIENTO Revisar si hay Sujetadores Sueltos Limpiar/Inspeccionar el Recogedor de Cesped * Controlar los Neumaticos Controlar las Ruedas Motrices _1_ Limpiar la Segadora ..
Page 85
SEGADORA 5. Instale el perno de la cuchilla con la arandela de seguridad y la arandela endurecida en el Siempre observe las reglas de seguridad cu- adaptador de la cuchilla y el cigueSal. ando haga el mantenimiento. 6. Use un bloque de madera entre la cuchilla LLANTAS y la caja de la segadora y apriete el perno •...
Page 86
RECOGEDOR DE CESPED Remueva ia tapa del dep6sito del aceite; • El recogedor de cesped puede ser rociado dejela a un lado en una superficie iimpia. con el agua de la manguera pero tiene que Incline ia cortadora de cesped por este estar seco cuando se vaya a usar.
Page 87
Labio Plancha trasera Mueva el cortacespedes de cesped a un Area de la hierba cortada o de otra superfi- cie dura. NOTA: El agua, la hierba y la otra ruina escur- rirb.n debajo de la cubierta del cortacespedes durante el proceso del derrubio. Quite el colector de la hierba y descargue el montaje del canal inclinado del cortaces- pedes de cesped.
Page 88
_bADVERTENClA: Para evitar lesi6nes serias, antes de dar calquier servico o de hacer ajustes: Suelte la barra de control y pare el motor. AsegOrese que la cuchilla y que todas las partes movibles se hayan detenido completamente. Desconecte el alambre de la buj[a y p6ngalo en donde no pueda entrar en contacto con esta. PARA CAMBIAR CORREA DE IMPULSION...
Page 89
MOTOR debido a problemas que se sospecha vienen del carburador, Ileve su segadora a contacto VELOCIDAD DEL MOTOR con su centro de servicio Sears o con un otto La velocidad del motor ha sido ajustada en centro de servicio cualificado para repararla y/o la fAbrica.
ACEITE DEL MOTOR MOTOR Drene el aceite (con el motor caliente) y cb.m- SISTEMA DE COMBUSTIBLE bielo con aceite de motor limpio. (Vea "MO- iMPORTANTE: Es importante evitar que TOR" en la secci6n de Mantenimento de este se formen depositos de coma en partes manual.) fundamentales del sistemade combustible...
Page 91
SOLUCION DE PROBLEMAS - Yea ia seccion apropiada en el manual amenos este dirigido a un centro de servico Sears. CAUSA PROBLEMA CORRECClON No arranca Cuchilla suelta o adaptador Apriete el perno de la cuchilla (continuado) de la cuchilla quebrado. cambie el adaptador de la cuchilla.
Page 92
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917,374552 _"...
Page 93
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917.374552 PART PART PART DESCRiPTiON DESCRiPTiON DESCRiPTiON 184576 Upper Handle Assembly 175735 Hinge Bracket Assembly - - - Engine, Briggs & Stratton, Model Number 128T05- (Includes Foam Grip) 419942X428 Discharge Deflector 438396...
Page 94
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917,374552 ..... 41 31 3415 \\\\...
Page 95
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917.374552 PART PART DESCRiPTiON DESCRIPTmON 434776 Drive Control Assembly 428781 Cover, Dust, Wheel (Includes Speed Selector and Cable 17000510 Screw, Hex Head 1/4-20 x 1/2 426260X428 Cover, Top 404845 Pawl, Drive 406262...
Page 99
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 128T05=1268=B1 121 CARBURETOR OVERHAUL 104 _ 127 _ 163 6 276CW) 633 _# 358 ENGINE GASKET SET 20_;_ 177 ,_ bp 163 _ 524 _ 883 i _ _ 1095 VALVE GASKET SET Engine Power Rating Information The gross power rating for individual gas engine models is labeled in accordance with SAE (So- ciety of Automo-tive...
Page 100
BRIGGS & STRATTON 4=CYCLE ENGINE MODEL NUMBER 128T05=1268=B1 PART PART DESCRIPTION DESCRIPTION 697322 Cylinder Assembly 797306 Rod-Connecting (Used After 399269 Kit-Bushing / Seal Code Date 09041600). (Magneto Side) 499424 Rod-Connecting 299819s Seal-Oil (Magneto Side) (Used Before Code Date 493279 Sump-Engine 09041700).
NEED MORE HELP? Y@Jll fir@ the answer and more on _anagemyhOmeoCOm _ for free! o Find this and a[[ your other product manuals online. o Get answers from our team of home experts. o Get a personalized maintenance plan for your home. o Find information and tools to help with home projects.