General Maintenance; Cleaning; Cutting Line - Craftsman Weedwacker 172.74533 Operator's Manual

OPERATING INSTRUCTIONS cont.
Be sure the trimmer is shut off.
iAIw.....o; urno"' etoo'anO I
outlet BEFORE any maintenance on the grass trimmer
GENERAL MAINTENANCE
Keep your grass trimmer clean and in good repair for maximum long-lasting
performance. Before each use, inspect the switch and cord for damage.
Check for damaged, missing, or worn parts. Check for loose screws,
misalignment, moving parts that are jammed, or any other conditions that
may affect the operation. If abnormal vibration or noise occurs, turn off the
tool immediately and have the problem corrected before further use. DO NOT
use the grass trimmer until it is properly repaired or replaced.
CLEANING
Wipe the outside of the grass trimmer with a dry, soft cloth. DO NOT hose
down or wash the grass trimmer with water. Scrape the guard and spool
area to remove dried clippings and mud. Brush or blow dust, debris, and
grass clippings out of the air vents. Keep the vents free of obstruction.
CU'I-rlNG LINE
Replace the cutting line only with nylon monofilament line on pre-wound
spools. ALWAYS wind the line is the same direction as the arrow on the
bottom of the spool.
18