Advertisement
LY
INSTALL
t\,IULCHER
PLATE
(See Figs, 5 and 6)
-
Install two Jatch hooks to mulcher pBate using screw,
washer, lock washer, and weid nut as shown.
NOTE: Pre-assemble weld nut to latch hook by inserting
weld nut from the top with hook pointing down°
-
Tighten hardware securelyo
®
Raise and hold deflector shield in upright position.
•
Place front of mulcher plate over front of mower deck
opening and slide into place, as shown.
-
Hook front latch into hole on front of mower deck.
-
Hook rear latch into hole on back of mower deck.
guard when a,aching
muiche,
plate
TO CONVERT
TO BAGGING
OR
DISCHARGING
Simply remove mulcher plate and store in a safe place.
Your mower is now ready for discharging or installation of
optional grass catcher accessory.
NOTE: it is not necessary to change blades. The mulcher
blades are designed for discharging and bagging also.
WELD NUT
FROM THE TOP
NOOK POINTS
LATCH
NOOK
HOOK
WASHER
MULCHER
PLATE
FiG. 5
WELD
NUT
DEFLECTOR
SHIELD
LATCH
HOOKS
FiG. 6
9
Advertisement
