Advertisement
Theseaccessories wereavailable w henthislawn
mower was produced. They are also
available at most Sears retailoutlets and service centers. Most Soars stores can also order
repair parts for you, when you provide the model number of your lawn mower. Some of these
accessories may not apply to your lawn mower.
LAWN MOWER
PERFORMANCE
CUPPING DEFLECTOR
FOR REAR DISCHARGE LAWN MOWERS
GRASS CATCHERS
FOR
REAR DISCHARGE
LAWN
MOWERS
MULCHER KITS
GRASS CATCHERS
FOR
SIDEDISCHARGE
LAWN MOWERS
STABlUZER
GAS CANS
LAWN MOWER MAINTENANCE
MUFFLERS
AIR RLTERS
SPARK PLUGS
BELTS
BLADES
BLADE ADAPTERS
WHEELS
ENGINE OIL
Read these instructions and this manual
in its entirety before you attempt to
assemble or operate your new lawn
mower. Your new lawn mower has been
assembled at the factory with the excep-
tion of those parts left unassembled
for
shipping purposes. All parts such as nuts,
washers, bolts, etc., necessary to com-
plete the assembly have been placed in
the parts bag. To ensure safe and proper
operation of your lawn mower, all parts
and hardware you assemble must be
tightened securely. Use the correct tools
as necessary to ensure proper tightness.
TO REMOVE
LAWN
MOWER
FROM
CARTON
• Remove loose parts included with
mower.
• Cut down two end corners of carton
and lay end panel down flat.
• Remove all packing materials except
padding between upper and lower
handle and padding holding operator
presence control bar to upper handle.
• Roll lawn mower out of carton and
check carton thoroughly for additional
loose parts.
HOW
TO SET UP YOUR
LAWN
MOWER
TO UNFOLD
HANDLE
IMPORTANT:
Unfold handles carefully
so as not to pinch or damage control
cables.
• Raise handles until lower handte
section locks into place in mowing
position.
• Remove protective padding, raise upper
handle section into place on lower
handle and tighten both handle knobs.
• Remove handle padding holding
operator presence control bar to upper
handle.
4
Advertisement
