Download Print this page

Craftsman WEEDWACKER 358.745460 Operator's Manual page 6

5 amp motor 14 inch cutting path / 0,065 in. line electric weedwacker

Advertisement

• Use only indaylight oringood a rtifi-
cial l ight.
MAINTENANCE
SAFETY
_WARNING:
Disconnect
unit
from the power supply before perform-
ing maintenance,
or when changing
trimmer line.
• Maintain unit according
to recom-
mended
procedures.
Keep cutting
line at proper length. Follow instruc-
tions for changing
trimmer line.
• Have all service and maintenance
not explained
in this manual per-
formed by an authorized
service
dealer to avoid creating a hazard.
• Never douse or squirt the unit with
water or any other liquid.
Clean unit
and labels with a damp sponge.
Keep handles dry, clean, and free
from oil and grease.
• Keep the air vents clean and free of
debris to avoid overheating
the mo-
tor. Clean after each use,
TRANSPORTING
AND STORAGE
• Stop the unit and disconnect
the
power source when not in use.
• Carry the unit with motor stopped.
• Store unit indoors in a high, dry
place out of the reach of children.
Store unit unplugged.
• Do not hang unit so that the trigger
switch is depressed.
DOUBLE
INSULATION
CONSTRUCTION
This unit is double insulated to help
protect against electric shock. Double
insulation
construction
consists
of two
separate
"layers" of electrical
insula-
tion instead of grounding.
Tools built
with this insulation
system are not in-
tended to be grounded.
No grounding
means is provided
on this unit, nor
should a means of grounding
be add-
ed to this unit. As a result, the exten-
sion cord used with your unit can be
plugged
into any standard
t20 volt
electrical
outlet. Safety precautions
must be observed when operating
any
electrical
tool. The double insulation
system only provides
added protec-
tion against injury resulting
from an
internal electrical
insulation
failure.
_[_WARNING:
Atl electrical
repairs
to this unit, including
housing,
switch,
motor, wires, etc., must be diagnosed
and repaired by qualified service per-
sonnel.
Replacement
parts for a
double insulated appliance
must be
recommended
by the manufacturer.
A
double insulated appliance
is marked
with the words "double insulation"
or
"double
insulated".
The symbol
(square within a square)
[]
may also
be marked on the appliance.
Failure to
have the unit repaired by qualified
ser-
vice personnel
can cause the double
insulation
construction
to become
inef-
fective and result in serious
injury.
SAVE
THESE
INSTRUCTIONS
CARTON
CONTENTS
Check carton contents
against the fol-
lowing list.
Model 388.745460
• Trimmer
• Shield
• Assist handle
• Wheel
Examine parts for damage.
Do not
use damaged
parts.
NOTE: tf you need assistance
or find
parts missing or damaged,
call
1-800-235-5878.
ASSEMBLY
_WARNING:
If received
as-
sembled,
review all assembly
steps to
ensure your unit is properly as-
sembled
and all fasteners
are secure.
SHAFT ASSEMBLY
WARNING:
Ensure that the ex-
cess wire between the switch handle
and motor housing is not twisted and is
enclosed
in switch handle and motor
housing during assembly of the unit.
Failure to do so may result in damage
to the wires and/or the unit or serious
injury to the operator including electro-
cution.
1. Push the tube into the switch han-
dle until it snaps into place.
,
j_
Tube

Hide quick links:

Advertisement

loading