Download Print this page

Craftsman 358.351161 Operator's Manual page 6

2.4 cu. in./40cc 2-cycle gasoline chain saw

Advertisement

Available languages

Available languages

KNOW
YOUR
SAW
READ THiS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERAT-
ING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize
yourself with the location of the various controls and adjustments. Save this
manual for future reference.
Chain Adjust-
ment Too!
,
.
FrontHandle
HandGuarcI
J|
_/
Bar Oil Fil! Cap
Housing
Fuel Mix RJlCap
CylinderCover
Throttle
Lockout_
Rear
Adjusting
Handle
CRllFTSNNIr
Throttle
Choke
/
Bar Clamp Nuts
\
Trigger
Knob
Bar Clamp
Chain
Guide Bar
Catcher
Chain
Direction
of Trave!
THROTTLE
LOCKOUT
CHAIN TENSION
The throttle lockout must be pressed
it is normal for a new chain to stretch
before you can squeeze the throttle trig- during first 30 minutes of operation. You
ger. This feature prevents you from ac-
cidentally squeezing the trigger.
CHOKE/FAST
IDLE LEVER
The choke and fast idle speed are set
by pulling the choke lever out fully for
cold or for refueled starting. The choke
provides additional fuel when stading a
cold engine.
should check your chain tension fre-
quently. See Chain Tension under the
Service and Adjustments section.

Advertisement

loading

This manual is also suitable for:

358.351081