Operation; Know Your Weedwacker; Double Insulation Construction - Craftsman Weedwacker 358.799080 Operator's Manual

, H ,,l=u H= H, i =
OPERATION
,,,,,,,.,, ..........
KNOW YOUR WEEDWACKER (Fig. 4)
READ THIS OPERATOR'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR WEEDWACKER ®. Compare the
iflustrationswith your unit to familiarize yourself with the location of the various controls and adjustments. Save this
manuel for future reference.
CORD RETAINER
RECESSED PLUG J
ASSISTHANDLE
TRIGGER SWITCH
DEBRIS SHIELD --
LINE LIMITER J
(Underside of Debris Shield)
• SEMI-AUTOMATIC HEAD
CUTTING UNE
ii i
The RECESSED PLUG is where you attach your exten-
sion cord to the unit.
The TRIGGER SWITCH is used to turn on the unit.
Squeeze the trigger switch to operate the unit.
ii u i i L
Figure 4.
The LINE UMITER cuts the cutting lineto the proper cut-
ting length.
The ASSIST HANDLE is used to help hold and guide the
unit.
The SEMI -AUTOMATIC HEAD holds the cutting lineand
rotates during operation.
DOUBLE INSULATION CONSTRUCTION
WARNING
ALL ELECTRICAL REPAIRS TO THIS UNIT,
INCLUDING HOUSING, SWITCH, MOTOR,
ETC., MUST BE DIAGNOSED AND
REPAIRED BY QUAUFIED SERVICE
PERSONNEL REPLACEMENT PARTS
FOR A DOUBLE INSULATED APPLIANCE
MUST BE IDENTICAL TO THE PARTS
THEY REPLACE. A DOUBLE INSULATED
APPLIANCE IS MARKED WITH THE
WORDS "DOUBLE INSULATION" OR
"DOUBLE INSULATED." THE _.YMBOL
(SQUARE WITHIN A SQUARE) igl MAY
ALSO BE MARKED ON THE APPUANCE.
FAILURE TO HAVE THE UNIT REPAIRED
BY SEARS QUALIFIED SERVICE
PERSONNEL CAN CAUSE THE DOUBLE
INSULATION CONSTRUCTION TO
BECOME INEFFECTIVE AND RESULT IN
SERIOUS INJURY.
This unit is Double Insulated to help protect against
electric shock. Double insulation construction consists
of two separate "layem" of electrical insulation instead of
grounding.
Toolsand appliances built with a double insulation sys-
tem are not intended to be grounded. No grounding
means is provided on this unit, nor should a means of
grounding be added to this unit. As a result, the exten-
sion cord used with your unit can be plugged into any
standard 120 volt elec_ca! outlet.
Safety precautions must be observed when operating
any electrical tool. The double insulation system only
provides added protection against injury resu_ng from
an internal electrical insulation failure.
-8-