Advertisement
GARDENA Garden Vac
1. Technical data
Motor – power consumption
Mains voltage
Frequency
Vacuum power
Blow power
Weight
Contents of the catcher
Workplace related sound
pressure level L
1)
pA
Noise emission value L
Hand / arm vibration a
Measuring method according to 1) EN 50144 -1 2) directive 2000 / 14 / EC
2. Operating instructions information
Please read and follow these
operating instructions carefully.
Familiarise yourself with the unit's
features, its proper use and the
safety instructions included.
3. Product use
The GARDENA Garden Vac
is designed for vacuuming and
blowing leaves and dirt as well
as for vacuum cleaning together
with the dust filter in private
gardens.
This Garden Vac is not designed
for use in public facilities, parks,
4. Assembly
(ill. B)
Contents check
The carton contains the
following items:
.motor part of the Garden Vac
.vacuum tube
.connection angle
.tube runner
.surface vacuum tube
.catcher
.vacuum hose
.additional handle
(two handle halves)
.1 dust filter
.fixing parts (screws, nuts,
caps)
12
with shredding and blowing facility
1400 W (max. 1500 W)
230 V
50 / 60 Hz
max. 12.5 m
max. 260 km / h
approx. 4.5 kg
70 l
92 dB (A)
2)
measured 100 dB (A) / guaranteed 102 dB (A)
WA
1)
< 2.5 ms
vhw
For safety reasons child-
A
ren under the age of 16
or people who are not familiar
with these operating instruc-
sporting grounds, on roads, in
agriculture or forestry.
It is essential to observe the
manufacturer's operating instruc-
tions to ensure the unit's proper
functioning. These instructions
also contain advice for service,
maintenance and repair.
.operating instructions
.counter ring
Fitting the vacuum tube
Before starting work, fit the
vacuum tube (1) provided onto
the vacuum tube connector of
the unit (1a). Now slide the two
handle halves of the additional
handle (2) over the junction point
of the vacuum tube (1) and
vacuum tube connector (1a).
Take care that the angled addi-
tional handle (2) faces towards
the motor casing.
3
/ min.
- 2
tions should not use this
Garden Vac.
Please keep these operating
instructions in a safe place.
Attention! For health
A
and safety reasons the
Garden Vac must not be used
in areas with health-endanger-
ing dusts or for vacuuming
wet materials.
Secure the additional handle (2),
using the three screws provided.
Cover the bore holes with the
caps.
Attention!
For safety reasons you should
not disassemble the vacuum
tube once assembled!
Fitting the tube runner
Lock the tube runner (3) provided
by inserting it into the recess (4)
of the vacuum tube (1). Secure it
with the screw and nut provided.
G
Advertisement
