Operation - Gardena WP 700 S 7851 Operating Instructions Manual

G
Applications:
Examples – System Extensions – Product Recommendations
➔ Example for application:
Water jets for
26,5 mm (G 3 /4) thread
Water jets may be integrated into water features.
connections
Model Cascade Water
Bell
Art.
7814 * 7816
No.
× × × ×
WP 700 S 7851
× × × ×
WP 1500 S 7857
* contained in delivery volume
➔ Example for application:
Pond aeration
To aerate the pond.
➔ Product :
GARDENA Pond Aerator
Zeolith fulfils the following functions:
Filling the filter tank
Filters the water (➔ protection for the pump).
with zeolith .
Bonds with excessive nutrients and causes their decomposition
.
by bacteria (➔ Ion exchange and the bonding of e.g. nitrate).
Helps to keep the pond clean and maintain the biological
.
balance.
Provides stability for the pump
.
GARDENA Zeolith, 1 l
GARDENA Zeolith, 5 l
Note :
To ensure the zeolith functions correctly, we recommend you
replace or clean it every 6 months (e.g. in salt water).
Information Always unplug the pump first before working on it.
.
Before assembling system extensions first unscrew the pre-
.
assembled cascade and if necessary also the telescopic tube
of the pump and then screw one of the water jets on again
(➔ the ball-and-socket joint ensures that the water jet is ver-
tical.)
Follow the Safety and Assembly Information attached to the
.
operating instructions.
12
Foaming Water Water- Cascade
Jet Spray Fleur-de-Lis fall Rotating
7818 7820 7822 7823
× × × ×
– –
× × × × × ×
–
Art. No. 7936
Art. No. 7914
Art. No. 7915

Operation

Installing the pump 1. Remove the pump from the filter basket and screw the regulator
supplied onto the second opening of the pump up to the limit
stop (➔ max. delivery capacity on the vertical outlet). Then
replace the pump in the filter basket.
2. Put the pump on a stable base to ensure that the upper edge of
the filter tank is completely immersed in water.
Caution : Submersion depth Please note the maximum submersion depth (see "Technical Data").
Assembling the solar panel
Insert both aluminium poles
2
. Place one of the O-rings
solar panel
4
4
3
Important : when tightening the screws, ensure that you do not
3
screw them too tight to ensure that the solar panel can still be
easily adjusted.
2
1
Positioning the solar panel Position the solar panel in such a way that it will be exposed
to direct sunlight. No shadow should be cast on it.
The ideal positioning angle is 30° from the vertical.
The solar panel must not be positioned near easily flammable
A
substances.
After adjusting tighten the screws firmly.
Permanent installation The solar panel can be permanently installed in an outdoor area.
.
of the solar panel
For this purpose you should attach the appliance to a wall, e.g.
with wooden bolts.
For permanent installation of the appliance you should ensure
.
that it is exposed to maximum solar radiation.
The special glazing of the solar panel ensures complete protec-
.
tion against hailstones and other adverse weather conditions.
Starting the pump Connect the power cable of the pump to the socket of the solar
panel.
The pump will start as soon as enough energy has been
generated from solar radiation in the solar panel.
1
into the holes in the side sections
3
on each of the swivel pins
5
then screw both side sections to the solar panel.
G
4
of the
13