5.3.8
Setting the Boot array in the BIOS Setup Utility
You can set the boot priority sequence in the BIOS for your RAID arrays when
creating multi-RAID using the Intel
To set the boot array in the BIOS:
Set at least one of the arrays bootable to boot from the hard disk.
1.
Reboot the system and press <Del> to enter the BIOS setup utility during
POST.
Go to the Boot menu and select the option Boot Device Priority.
2.
3.
Use up/down arrow keys to select the boot priority and press <Enter>. See
section 4.6.1 Boot Device Priority for details.
From the Exit menu, select Exit & Save Changes, then press <Enter>.
4.
When the confirmation window appears, select OK, then press <Enter>.
5.
5-32
Matrix Storage Manager.
®
Chapter 5: RAID configuration