Primary Ide Master/Slave - Asus STRIKER II FORMULA - Republic of Gamers Series Motherboard User Manual

4.3.5

Primary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE devices.
There is a separate sub-menu for each IDE device. Select a device item then
press <Enter> to display the device information.
Main
PIO Mode
UDMA Mode
Primary IDE Master
Access Mode
Capacity
Cylinder
Head
Sector
Transfer Mode
F1:Help
ESC: Exit
The BIOS automatically detects the values opposite the dimmed items
(Capacity, Cylinder, Head, Sector and Transfer Mode). These values are not
user�configurable. These items show N/A if no ID� device is installed in the
system.
PIO Mode [Auto]
Sets the PIO mode for the IDE device.
Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4]
UDMA Mode [Auto]
Disables or sets the UDMA mode. Configuration options: [Disable] [Auto]
Primary IDE Master/Slave [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection
is successful, the BIOS automatically fills in the correct values for the remaining
fields on this sub�menu. If the hard disk was already formatted on a previous
system, the setup BIOS may detect incorrect parameters. Select [Manual] to
manually enter the IDE hard disk drive parameters. If no drive is installed select
[None]. Configuration options: [None] [Auto] [Manual]
4-14
Phoenix-AwardBIOS CMOS Setup Utility
Primary IDE Master
[Auto]
[Auto]
[Auto]
[Auto]
None
↑↓ : Select Item
→←: Select Menu
0 GB
0
0
0
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Set a PIO mode for the
IDE device. Mode0
through 4 successive
increase in
performance.
F5: Setup Defaults
F10: Save and Exit
Chapter 4: BIOS setup