Table of Contents
Advertisement
Connecting to networks and devices
30
2. Touch Settings > Wireless & networks > Bluetooth settings .
3. If Bluetooth is not on, touch Bluetooth to turn the function
on.
4. Touch Scan for devices . Your device will start to scan for
Bluetooth devices within range.
5. When you see the name of your headset displayed in the
Bluetooth devices section, touch the name. Your device then
automatically tries to pair with the headset.
6. If necessary, enter the PIN or passcode supplied with your
headset.
The pairing and connection status is displayed below the hands-
free headset or car kit name in the Bluetooth devices section.
Depending on the type of headset or car kit you have connected,
you can then start using the device to listen to music or make and
receive phone calls.
To disconnect a Bluetooth device
1. From the Home screen, press the Menu Key
2. Touch Settings > Wireless & networks > Bluetooth settings .
3. In the Bluetooth devices section, touch and hold the device
you wish to disconnect.
4. Touch Disconnect .
To unpair from a Bluetooth device
You can make your device forget its pairing connection with
another Bluetooth device. To connect to the other device again,
you may need to enter or confirm a PIN or passcode again.
1. From the Home screen, press the Menu Key
2. Touch Settings > Wireless & networks > Bluetooth settings .
.
.
Advertisement
Table of Contents
