Configuring For A Windows Network; Setting Up The Host System - Epson Stylus Photo 1200 Printer Basics Manual

Configuring for a Windows
Network
If your computer is on a Windows 95 or Windows 98 network and you want other
users to share the printer connected to it, you need to:
Set up the system connected to the printer (host system) so the printer can be
shared
Define a path to the printer on each client computer
Before following the steps here, make sure you've installed the printer software on all
the computers that will use the printer. See the Start Here card for instructions.
If you're using your printer on a Windows NT 4.0 network,
see your network administrator or your Windows NT
documentation for instructions on configuring your printer for
the network.

Setting Up the Host System

1. Click , point to
Start
2. Double-click
Network
3. Click the
I want to be able to allow others to print to my printer(s)
and click .
OK
4. In the Network window, click
5. In the Control Panel, double-click
6. Right-click the
EPSON Stylus Photo 1200
7. Click the
Shared As
Password as necessary and click
, and select
Settings Control Panel
, then click the
File and Print Sharing
.
OK
.
Printers
radio button. Then enter a Share Name, Comment, and
.
OK
.
button.
icon, then click
Sharing
checkbox
.
53