Epson Stylus Photo 1200 Printer Basics Manual page 21

8. Check the following settings:
Make sure the Media Type is set to
of paper, select the corresponding setting for it, as described on page 21. For
instructions on loading special paper, see page 18.)
Make sure Ink is set to
Set the Mode option to
printing results for all kinds of documents, on all types of paper.
Move the Quality/Speed slider to the
quality setting for the paper you're using.
9. Click the tab at the top of
Paper
the dialog box if you need to
change the paper size, paper
source, number of copies, or page
orientation.
10. Click the tab if you want to
Layout
reduce or enlarge your printed
image, print multiple pages on one
sheet of paper, or add a watermark.
11. Click until you see the Print
OK
dialog box again.
12. Click to start printing. After a
OK
moment, the Progress Meter appears
while your document is printing to
show you its progress. You can cancel
, pause , or restart
job as necessary.
For more information on printing, see the electronic EPSON Stylus Photo 1200
Manual. See page 11 for instructions on viewing the manual.
Plain paper
if you want to print in color.
Color
. This is the easiest way to get good
Automatic
Quality
Paper tab
your print
. (If you load a different type
setting. This selects a high
Paper Size setting
15