Windows System Requirements
To use your printer and its software with a PC, your system should have:
®
An IBM
Windows NT
100 MHz or faster recommended)
Microsoft
At least 16MB of RAM (32MB for Windows 95 or 98 or 64MB for
Windows NT 4.0 recommended)
At least 50MB of free hard disk space (100MB recommended)
VGA, Super VGA, or better display adapter and monitor
Quad-speed (4
For parallel connection, a high-speed, bidirectional, IEEE-1284 compliant
parallel cable (6 to 10 feet long); the cable must have a D-SUB, 25-pin, male
connector for your computer and a 36-pin, Centronics
the printer.
For USB connection to a computer running Windows 98 with a Windows 98
compliant USB port, a shielded USB "AB" interface cable, from Series A
(computer) to Series B (printer), up to 6.5 ft. (2 meters) long.
4
compatible PC with at least a 486/25 MHz (for Windows 95 or
®
4.0), or 486/66 MHz (for Windows 98) processor (Pentium
®
Windows 95, Windows 98, or Windows NT 4.0
) or faster CD-ROM drive for installing the printer software
x
Using an improperly shielded USB cable—especially a cable
more than 6.5 ft. (2 meters) long—may cause the printer to
malfunction.
®
®
compatible connector for