Know Your Pressure Washer - Craftsman 580.753400 Owner's Manual

KNOW YOUR PRESSURE WASHER
Read the owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Nozzle Extension with
Oil Fill Cap/Dipstick Fuel Tank
Throttle Lever
Choke Lever
Fuel Valve
Recoil Starter
(on front of engine)
Air Filter
High
Pressure
Hose
Spray Tips
Chemical Injection
Siphon/Filter
Pressure
Control Knob
Pump equipped with
Automatic Cool Down System
Water Inlet
High Pressure Outlet
with Quick Connect
Air Filter -- Protects engine by filtering dust and debris
out of intake air.
Automatic Cool Down System -- Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Chemical Injection Siphon/Filter -- Use to siphon
detergent or other pressure washer chemicals intothe
low pressure stream.
Choke Lever -- Prepares a cold engine for starting.
Fuel Valve -- Used to turn fuel on and off to engine.
Fuel Tank -- Fill tank with regular unleaded gasoline.
Always leave room for fuel expansion.
High Pressure Hose -- Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet with Quick Connect -- To
connect high pressure hose.
Nozzle Extension with Quick Connect -- Allows you to
switch between five different spray tips.
Oil Fill Cap/Dipstick -- Check and fill engine with oil
here.
Pressure Control Knob -- Varies the pressure of the
high pressure spray.
Pump -- Develops high pressure.
Recoil Starter -- Use for starting the engine manually.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes safety
latch.
Spray Tips- Chemical injection, 0 °, 15 °, 25°, and 40°:
for various cleaning applications.
Throttle Lever--Sets engine in starting mode for
recoil starter.
Water Inlet-- Connect garden hose here.
5