Troubleshooting Guide - NAD S70 Owner's Manual

Remote control works
intermittently or doesn't
work at all
Sleep Timer and Timer
functions can't be activated
Although activated, Sleep
Timer and Timer function do
not work properly or at all
Sometimes not all
components respond to
On/Off command, causing
these to be "out-of-sync" for
stand-by/operating status
Display is difficult to read
GB
16

TROUBLESHOOTING GUIDE

Problem
• Battery flat or snap-on
• IR transmitter or receiver
• IR receiver on components
• These functions are
• IR transmitter or receiver
• IR receiver on components
• Remote control is just out
• Too little or too much
• Battery almost flat
Cause
connector incorrectly
attached
windows obstructed
are in direct sun or very
bright ambient light
available only if clock is
activated
windows obstructed
are in direct sun or very
bright ambient light
of range
contrast
Solution
• Check or replace battery
• Remove obstruction
• Place unit away from
direct sun, reduce amount
of ambient light
• Activate clock
• Remove obstruction
• Place unit away from
direct sun, reduce amount
of ambient light
• Reduce operating distance
• Connect NAD-Link
between components
• Adjust display's contrast
level
• Replace battery