How To Use The L-Platform - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.0.0 User Manual

4.6 How to Use the L-Platform

This section explains how to use the L-Platform after it is deployed.
Based on the information below, a deployed L-Platform can be accessed using the remote desktop function.
Item
IP address
User ID
Password
Note
The initial password is already set up after the L-Platform is deployed. Be sure to change the password when the L-Platform starts to
operate.
1.
The IP address can be confirmed using the following procedures.
2.
Select Server List on the Management page of L-Platform Management.
3.
Check IP address of the target server from the list displayed.
[Windows] Administrator
[Linux] Root
The initial password can be confirmed using the following procedures:
1.
Select Service List on the Management page of L-Platform Management.
2.
Select the target L-Platform and click the Details button.
3.
Select the target virtual server from the list displayed and click the Initial PWD button.
Value
- 81 -