Freestyle Nomad Manual page 24

TO SELECT THE ALARM MODE OF INDIVIDUAL ALARM
1. In individual alarm (AL-1 to AL-5), press and hold S4
button for around 3 seconds. The message "Time-AL"
will be displayed.
2. Press S1/S2 button to select time alarm setting mode
(Time-AL), altitude alarm setting mode (ALTI- AL) or
pressure alarm (BARO-AL).
3. Press S3 button to enter into each setting mode.
4. Press S4 button to return to ALARM mode.
TO SET THE TIME ALARM
In time alarm setting mode,
1. Press S1/S2 button to set the hour digits. Holding down
the button will speed up the process.
2. Press S3 button once, the minute digits will blink. Press
S1/S2 button to set the minute digits.
3. Press S3 button to set the time zone. Press S1/S2 button
to toggle between T1 and T2 time zones.
4. After finishing making all the settings, press S4 button
to return to ALARM mode.
TO SET THE ALTITUDE ALARM
In altitude alarm setting mode,
1. Press S1/S2 button to set the altitude value (in units M
(meter) or Ft (feet)). Holding down the button will speed
up the process.
2. After finishing making all the settings, press S4 button
to return to ALARM mode.
NOTE: When altitude arrives or over the set value, a beep
sound will be emitted for 20 seconds. Then the alarm will
be deactivated automatically.
25