Freestyle Nomad Manual page 12

TO SHOW THE LOG DATE AND TIME
1. In ALTIMETER mode, press S2 button to display log date
and time.
2. Press S3 button or leave the watch idle for 5 seconds to
return to ALTIMETER mode.
TO CLEAR THE DATA
1. In ALTIMETER mode, press and hold S2 button for around
3 seconds to clear all statistic data and graphic data.
NOTE: In the bar chart, after clearing the data, the first new
data will be updated after 2 seconds and another will be
taken in 30 minutes.
TO VIEW ALTITUDE AND OTHER INFORMATION
1. In ALTIMETER mode, press S1 button to toggle between
the accumulative ascent (ASCENT), accumulative
descent (DESCENT), difference in altitude (DIFFER), rate
(RATE) or time (TIME).
2. While toggling, each mode in ALTIMETER is displayed for
around 2 seconds, followed by a display of the
data in a bar chart.
NOTE: To reset the difference in altitude to zero, press and
hold S1 button for around 3 seconds when the difference in
altitude data is displayed.
TO VIEW DATA IN DETAIL
1. In ALTIMETER mode, press S4 button once. The mes
sage "VIEW DATA" will be displayed.
2. After 3 seconds or by pressing S1/S2 button, the mes
sage "Highest" will be displayed.
13