Freecom Network Drive XS User Manual page 26

Freecom Network Drive XS
Firmware Version
EN
In the "Firmware Version" section you can find information which firmware version is
used in your device. Please have this information available for the Freecom Support if
5
you have problems with your Freecom Network Drive XS.
5.. Status – Network Information
DHCP Server Configuration
In this section you can select whether to use the Freecom Network Drive XS as DHCP Server or
not.
To enable the DHCP Server, select the "Enable" button and click on "Apply". If the DHCP
Server is already enabled and you want to disable it, select the "Disable" button and
click on "Apply".
Note: The current status of the DHCP Server is displayed to the left of the
"Enable" button.
5.. Status – Service Information
You can enable the FTP service / SMB service and specify. Select the "Enabled"/"Disabled"
button. You can enable/deactivate the FTP service / SMB service.
Click on "Apply" to save your settings.
5..4 Status – Disk Information
In this section, the status of the hard disk is displayed. You can find the following
information:
Disk ID:
Free Size:
Total Size:
6
Displays information about the hard disk
Shows the available free space of the hard disk
Shows the total size of the hard disk