Download Print this page

Port Information; General Settings; Command Line Interface - Fortinet FortiDB-400B Quick Start Manual

Hide thumbs Also See for FortiDB-400B:

Advertisement

Collecting Information

Port Information

Port 1
IP:
Netmask:
Port 2
IP:
Netmask:
Port 3
IP:
Netmask:
Port 4
IP:
Netmask:
The internal interface IP address and netmask must be valid for the internal network.
Configuring
Web-based Manager
Use the following procedure to connect to the web-based manager for the first time. Configu-
ration changes made with the Web Config are effective immediately without resetting the unit
or interrupting service.
To connect to the web-based manager
1.
Connect the Port 1 interface of the unit to Ethernet port of the management computer.
Use a cross-over Ethernet cable to connect the devices directly. Use straight-through
Ethernet cables to connect the devices through a hub or switch.
2.
Configure the management computer to be on the same subnet as the Port 1 interface.
To do this, change the IP address of the management computer to 192.168.1.2 and the
netmask to 255.255.255.0.
3.
To access the web-based manager, in your browser, go to https://192.168.1.99 (remem-
ber to include the "s" in https://).
4.
Type admin in the Name field, type fortidb1!$ in the Password field, and click Login.
After connecting to the Web-based manager, you can configure the unit IP address, DNS
server IP address, and default gateway to connect the unit to the network.
To configure interfaces
1.
Go to Appliance > Network > Interface.
2.
Click the edit icon to configure each interface.
3.
Set the IP address and netmask for the interface.
4.
Click OK.
To configure the Primary and Secondary DNS server IP addresses
1.
Go to Appliance > Network > DNS, enter the Primary and Secondary DNS IP address-
es click Apply.
To configure a Default Gateway
1.
Go to Appliance > Network > Static Routing and select Create New.
2.
Set Gateway to the Default Gateway IP address and click OK.
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
Visit these links for more information and documentation for your Fortinet product.
Technical Documentation - http://docs.forticare.com
Fortinet Knowledge Center - http://kb.fortinet.com
Fortinet Technical Support - http://support.fortinet.com
Training Services - http://campus.training.fortinet.com

General settings

Administrative account
User name
settings
Password
Network Settings
Default Gateway:
Primary DNS Server:
Secondary DNS Server:
A default gateway is required for the unit to route connections to the Internet.
Factory default settings
Port 1 interface
Port 2 interface
Port 3 interface
Port 4 interface
To reset the unit to the factory defaults, in the CLI type the command:
exec reset all-settings

Command Line Interface

The unit has serial port. Use the null modem cable to connect it to your management com-
puter.
To connect to the unit
1.
Use a null modem cable to connect the serial port to the management computer serial
port.
2.
Start a terminal emulation program (such as HyperTerminal) on the management com-
puter. Use these settings: Baud Rate 9600, Data bits 8, Parity None, Stop bits 1, Flow
Control None.
3.
At the login prompt, type admin for the user name and fortidb1!$ for the password
and press Enter.
After connecting to the CLI, you can configure the unit IP address, DNS server IP address,
and default gateway to connect the unit to the network.
To configure the unit using the CLI
1.
Set the IP address and netmask of the Port1 interface.
config system interface
edit port1
set ip <intf_ip>/<netmask_ip>
set allowaccess ping https ssh http
next
edit port2
next
edit port3
next
edit port4
next
end
3.
Configure the primary and secondary DNS server IP addresses.
config system dns
set primary <dns-server_ip>
set secondary <dns-server_ip>
end
4.
Configure the default gateway.
config system route
edit 1
set device <interface>
set dst <destination_ip>
set gateway <gateway_ip>
end
Shutting down the unit using the CLI
Enter the following command at the prompt:
execute shutdown
admin
fortidb1!$
____.____.____.____
____.____.____.____
____.____.____.____
192.168.1.99

Advertisement

loading