Nikon COOLPIX 900 User Manual page 36

Attach the other end of the cable to the computer's serial port (IBM
compatibles) or printer or modem port (Macintosh).
IBM compatible
D I
G I
T A
L
T A L
D IG
Macintosh
Note: When connecting the COOLPIX 900 to a computer, use only the
cables provided with the camera.
Once you have connected your camera to the computer's serial port, turn
the camera's selector dial to M-REC, A-REC, or PLAY. A data-transfer
icon will appear in the control panel together with a battery indicator and
the card icon. If no memory card is inserted in the camera, the card icon
will flash.
All other indicators and the color LCD monitor will be off, and the camera
will not respond when the zoom switch and control panel or monitor
buttons are pushed. The only control operative when the serial cable is
connected is the selector dial, which can only be used to turn the camera on
(by turning the dial to M-REC, A-REC, or PLAY) or off. To restore
normal operation, remove the serial cable.
Caution: Do not disconnect the serial cable while the data transfer
icon is flashing.
26
Nikon View 900: Connecting the Camera to a Computer