Owner’s Manual of your Electone. Installing this unit to the ELS-01/01C/01X The UD-USB01 can be installed to the bottom of the ELS series Electone by using four screws. You’ll also need a Phillips head (+) screwdriver. CAUTION This Owner’s Manual describes two methods of installation to the Electone: installing only this unit, and installing both this...
Method 1: Installing only this unit to the Electone Method 2: Installing both this unit and the UD-FD01 floppy Electone disk drive to the Electone UD-FD01 Electone Insert but do not fully tighten one of the screws to the right front None of the included screws are necessary in this method.