Advertisement
5. Configuring the Basic Settings with Plug & Play
When you turn the TV on for the first time, a sequence of prompts and screens will assist you in configuring basic
settings. Before you begin, make sure you have connected the TV to an antenna or a cable connection and that the TV
is plugged in. See "Connections" for instructions. To begin Plug and Play, press the
✎
Plug & Play is available only when the Input source is set to TV. See "Changing the Input Source".
1. Start Screen → Select a Language
After you press the Power button, the Start Screen appears. Press the
Plug & Play
ENTERE button on your remote to continue.
Select Language of the OSD.
English
On the Language screen, press the ENTERE button. Use the
Español
Language
▲
/
Français
U Move
E Enter
2. Select the Home Use Mode
On the Home Use screen, press ENTERE to select the Home Use
Plug & Play
mode.
Select 'Home Use' when installing this TV in your home.
✎
Store Demo
Home Use
L Move
E Enter
3. Select the Antenna Source
On the Antenna Source screen, select the source of your TV signal.
Plug & Play
Select the Antenna source to memorize.
Air
Air
Start
If your TV is connected to an antenna Choose Air, and then press
ENTERE. The TV will automatically start memorizing channels. When it
Cable
Start
is done, go to "Set the Clock Mode".
Auto
Start
Cable
If your TV is connected to a cable outlet, choose Cable, and then press
ENTER. Go to "Select the Cable Type".
U Move
E Enter
m Skip
Auto
✎
If you have connected a cable or
If you choose Auto, and then press ENTERE, the TV will automatically
satellite box to an HDMI, Component,
select the correct Antenna source. Go to "Select the Cable Type"
Composite, or Antenna input, and you
will use the box to select channels, press
the Menu (m) button on your remote to
skip this step.
4. Select the Cable Type
On the Cable Type screen, use the ◄/►/▲/▼ buttons to select the type
Auto Program
of digital and analog cable systems you have: STD, HRC, or IRC. Most
Select the cable system.
systems are STD (Standard). When done, select Start, and then press
ENTERE. The TV will start memorizing channels.
Analog
STD
HRC
IRC
✎
Digital
STD
HRC
IRC
START
✎
U Move
E Enter
R Return
7. Accessing and Using the Main Menu
Your TV's Main menu contains functions that let you control many of the TV's features. For example, in the Main menu
you can change the size and configuration of the picture, its brightnes, its contrast and so on. There are also functions
that let you control the TV's sound, channel configuration, energy use, and a host of other features. To access the main,
on-screen menu, press the
MENU
(m) button on your remote.
To use the Main menu, press the ▲/▼ buttons to move between the main option categories: Picture, Sound, Channel,
etc. Each time you press a ▲/▼ button, the main category name on the left side of the menu changes.
To select a menu option in one of the categories, press the ► button or the ENTERE button. Press it again or press
ENTERE to see the values or choices associated with that option. Usually, you would then press ENTERE to select
a value or choice. Press the
RETURN
button or the ◄ button to return to a previous screen or selection.
8. Using the TV's Controller
The TV's Controller, a small joy stick like button on the bottom left side of the TV, lets you control the TV without the
remote control.
Function menu
MEDIA.P
m
R
P
Return
TV Controller
Remote control senso
r
Power on
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjusting the
Adjust the volume by moving the Controller from side to side when the power is on.
volume
Selecting a
Select a channel by moving the Controller backwards and forwards when the power is on.
channel
Using the
To view and use the Function menu, press and release the Controller when the power is on. To
close the Function menu, press and release the Controller again.
Function menu
With the Function menu visible, select MEDIA.P by moving the Controller backwards. The
Selecting
Media Play main screen appears. Select a media source by moving the Controller back
Media Play
and forth, and then pressing the Controller.
With the Function menu visible, select the MENU (m) by moving the Controller to the left. The
Selecting the
OSD (On Screen Display) Menu appears. Select an option by moving the Controller to the right.
MENU (m)
Move the Controller to the right or left, or backwards and forwards to make additional selections.
To change a parameter, select it, and then press the Controller.
With the Function menu visible, open the Source List (
Selecting a
right. The Source List screen appears. To select a source. move the Controller back and forth.
Source (
)
When the source you want is highlighted, press the Controller.
POWER
button on your remote.
▼buttons to select a language, and then press ENTERE again.
Store Demo mode is for retail environments only.
Channel memorization can take up to 45 minutes, depending on
your cable system.
Memorized channels are added to the Added Channel list. These are
the channels you will see when you use the Channel buttons on your
remote.
- 5 -
) by pushing the Controller to the
- 7 -
5. Set the Clock Mode
Press ENTERE and select Auto or Manual, and then press ENTERE
Plug & Play
again.
Set the Clock Mode.
If you selected Auto:
Clock Mode
: Auto
The TV will automatically download the correct time from a digital channel.
The DST (Daylight Savings Time) screen will appear. Press ENTERE.
Select On if you want to turn the DST adjustment on and off manually.
Select Off to turn off the DST adjustment. Select Auto if you want the TV
E Enter
m Skip
to adjust to DST automatically. Press ENTERE when done.
The Time Zone screen will appear. Use the▲/▼ button to select your
Time Zone, and then press ENTERE.
If you selected Manual:
The Clock Set screen appears. Use the ▲/▼ buttons to change the
values in each field or use the number buttons to enter the values directly.
Use the ◄/►/ buttons to move from field to field. When done with all the
fields, press ENTERE.
6. View the HD Connection Guide
See the best way to connect a cable or satellite box for the highest quality HD pictures. Press the ENTERE button to
close the guide.
Press the ENTERE button.
✎
To set or unset Store Demo mode outside of Plug & Play, press and release the Controller when the power is
on. The Function menu screen appears. Push the Controller to the left (to MENU (m)) and hold for more than 5
seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu using the Controller,
push the Controller to the right (to Source(
6. Changing the Input Source
Source List
When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch to your cable
box or STB satellite receiver, you need to change the Source.
1. Press the
SOURCE
button on your remote.
2. Use the ▲/▼ buttons to select an external input source.
■ TV / AV / Component / HDMI1/DVI / HDMI2
■
You can only choose external devices that are connected to the TV. In the Source List, connected inputs are
✎
highlighted.
How to Use Edit Name
Edit Name lets you associate a device name to an input source. To access Edit Name, press the
the Source List is displayed The following selections appear under Edit Name:
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV /
■
IPTV / Blu-ray / HD DVD / DMA: Select the name of the device connected to specific input jacks to make your input
source selection easier.
✎
If you connect a PC to the
HDMI IN 1 (DVI)
port with an HDMI cable, assign PC to HDMI 1 in Edit Name.
✎
If you connect a PC to the
HDMI IN 1 (DVI)
port with an HDMI to DVI cable, assign DVI PC to HDMI 1 in Edit
Name.
✎
If you connect an AV device to the
HDMI IN 1 (DVI)
Name.
With the Function menu visible, select Power Off (P) by pulling the Controller forwards, and
Power Off (P)
then press the Controller.
✎
To close the Menu, Media Play List, or Source List, press the Controller for more than 1 second.
✎
When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the
controller. If you press it first, you cannot operate it to move the up/down/left/right directions.
9. Important Safety Information
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV. Doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided on the included Safety Flyer.
10. Questions? Comments?
Contact SAMSUNG WORLDWIDE
If you have any questions or comments about your Samsung TV, please contact the SAMSUNG customer care center.
Country
CANADA
Samsung Electronics Canada Inc.,
Customer Service
Address
55 Standish Court Mississauga
Ontario L5R 4B2 Canada
Customer Care
1-800-SAMSUNG (726-7864)
Center
Web Site
www.samsung.com
7. Enjoy your TV.
)) and hold for more than 5 seconds.
TOOLS
port with an HDMI to DVI cable, assign DVI to HDMI 1 in Edit
- 6 -
U.S.A
Samsung Electronics America, Inc.
85 Challenger Road
Ridgefield Park, NJ 07660-2112
- 8 -
button when
Advertisement
