Listening To Your Iphone Or Ipod - Altec Lansing IN MOTION IMT520 User Manual

1
Dock your iPhone or iPod in the
Altec Lansing inMotion Kick
speaker system.
2
Select "iPod" mode.
Press the "SOURCE" button on your
speaker system or full-featured remote
until the "iPod" LED lights up.
3
Press the button on your iPhone or iPod.
Music from your iPhone or iPod will start playing. The speaker system
and its remote are capable of controlling 3rd-generation iPod models,
the iPod touch and iPhone.
4
Adjust the volume.
Use the"+" and "–" buttons on the Altec Lansing speaker system or
full-featured remote to adjust the system volume.
5
Find your desired song.
Press the or button on your speaker system or full-featured
remote to go to the next or previous track. Press and hold the
or button on your speaker system or full-featured remote while a
track is playing for high-speed forward or reverse music search of the
current track.

Listening to Your iPhone or iPod

NOTE To conserve battery power, reduce the speaker system volume level.
During battery-only operation, the speaker system automatically
NOTE
shuts down if no audio is detected for a few minutes. This is to conserve
battery power. Press the button to turn the speaker system back on.
NOTE The speaker system is compatible with the alarm clock and sleep
timer features built into select iPhone and iPod models. For these features
to work properly, the speaker system must be connected to a wall outlet.
When an iPhone or iPod is docked, the speaker system will not shut down
automatically, enabling the alarm or sleep timer to play through the speaker
system. See the user guide for iPhone or iPod for details on how to access
these features.
NOTE During AC operation, if there is no iPhone or iPod docked and
no audio input signal is detected for a few minutes, the speaker system
automatically shuts down to conserve energy. Press the
the speaker system back on.
button to turn
11