Download Print this page

Advertisement

OPERATOR'S
MANUAL
II:RRFTSMRN I
19.2 VOLT BLOWER/VAC
Model No.
315.115920
_k
WARNING:
To reduce the risk of injury,
the user must read and understand the
operator's manual before using this
product.
BATTERIESAND
CHARGERS
SOLD
SEPARATELY
Craftsman
Consumer
Helpline:
1-800-932-3188
Sears, Roebuck
and Co., 3333 Beverly
Rd., Hoffman
Estates,
IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
987000-122
08-22-07 (REV:02)
Save this manual for future reference

Advertisement

   Summary of Contents for Craftsman 315.115920

  • Page 1

    Craftsman Consumer Helpline: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman 987000-122 Save this manual for future reference 08-22-07 (REV:02)

  • Page 2

    SEARS STORE OR OTHER CRAFTSMAN OUTLET IN THE UNITED STATES FOR FREE REPLACEMENT. If this Craftsman tool is used for commercial or rentai purposes, this warranty applies for only 90 days from the date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

  • Page 3

    • Use battery only with charger listed. WARNING] READ AND UNDERSTAND MODEL BATTERY PACK CHARGER INSTRUCTIONS. Failure to follow all instruc- 315.1t5920 130279005 Model No. 1425301 tions listed below, may result in electric shock, fire (Item No. 911375) (Item No. 911041) and/or serious personal injury.

  • Page 4

    • An extension cord should not be used unless WARNING] READ AND UNDERSTAND ALL absolutely necessary. Use of improper extension INSTRUCTIONS. Failure to follow all instructions cord could result in a risk of fire and electric shock. If listed below, may result in electric shock, fire and/or extension cord must be used, make sure: serious personal injury.

  • Page 5

    Someofthefollowing symbols maybeusedonthistool. Please studythemandlearn theirmeaning. Proper i nterpreta- tionofthesesymbols willallowyoutooperate thetoolbetterandsafer. SYMBOL NAME DESIG NATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) Watt Power Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current Class II Construction Double-insulated...

  • Page 6

    If you do not understand the warnings and your nearest SEARS PARTS AND REPAIR SERVICE instructions in the operator's manual, do not use this CENTER for repair. When servicing, use only identical product. Call the Craftsman Consumer Helpline at replacement parts. 1-800-932-3188 for assistance.

  • Page 7

    PRODUCT SPECIFICATIONS Motor ............... 19.2 Volt DC Charger Input ........120 V, 60 Hz, AC only Charge Rate .............. 1 hour Air Speed .............. 100 MPH 18in. WAND CREVICE FLOOR TOOL BRUSH 6 in. WAND VACUUM HOSE VACUUM Fig. 1 VACUUM KNOW YOUR BLOWER/VAC...

  • Page 8

    UNPACKING WARNING: If any parts are damaged or missing Thisproducthasbeen shipped completely a ssembled. do not operate this product until the parts are re- • Carefully r emove the product a ndanyaccessories from placed. Failure to heed this warning could result in the box.Makesurethatallitemslistedinthepacking serious personal injury.

  • Page 9

    NOTE: B atteries w illnotreach fullcharge thefirsttimethey CHARGING A HOT BATTERY PACK arecharged. A llowseveral c ycles(operation followedby When using the product continuously, the batteries in the recharging) forthemto become fullycharged. battery pack will become hot. You should let a hot bat- tery pack cool down for approximately 30 minutes before CHARGING...

  • Page 10

    TO INSTALL BATTERY PACK BLOWER SETTING VACUUMSETTING See Figures 3 - 4. • Place the power switch in the OFF (O) position. • Place the battery pack in the blower/vac. • Make sure the latches on each side of the battery pack snap in place and that battery pack is secured in the blower/vac before beginning operation.

  • Page 11

    FLOOR CREVICE INSERTING/REMOVING VACUUM ATTACHMENTS See Figure 9. BRUSH /TOOL Vacuuming can be performed with the hose or with the hose and brush or crevice tool attached. • Turn off the blower/vac. 18in. WAND • Attach the 6 in. wand and vacuum hose. •...

  • Page 12

    WARNING: When servicing, use only identical WARNING: Do not at any time let brake fluids, Craftsman replacement parts. Use of any other part gasoline, petroleum-based products, penetrating may create a hazard or cause product damage. oils, etc. come in contact with plastic parts. Chemi- cals can damage, weaken or destroy plastic which may result in serious personal injury.

  • Page 13

    CRAFTSMAN BLOWER/VAC - MODEL NUMBER 315.115920 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your BLOWER/VAC or when ordering repair parts. SEE BACK PAGE FOR PARTS...

  • Page 14

    CRAFTSMAN BLOWER/VAC - MODEL NU MBER 315.115920 The model number wilt be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your BLOWER/VAC or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING...

Comments to this Manuals

Symbols: 0
Latest comments: