Craftsman 315.115030 Owner's Manual page 13

CRAFTSMAN SANDER/POLISHER -- MODEL NUMBER 315.115030 _--
I The model number will be found on a plate attached to the motor housing. Always mention the model number i
in all correspondence regarding your CRAFTSMAN SANDER/POUSHER or when ordering repair parts.
I
SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS
Key PaN
No. Number
1 974892-001
2 612186-003
_
4 622322-001
5 972812-001
6 976491-001
7 972895-005
8 621984-000
9 621230-000
972000-136
PARTS LIST
Description Quan.
Polishing Bonnet ........................................ 1
Spanner Nut ............................................... 1
Sanding Disc
Rubber Disc ............................................... 1
Data Plate .................................................. 1
Logo Plate .................................................. 1
Auxiliary Handle ......................................... 1
Spanner Wrench ........................................ 1
Pin .............................................................. 1
Owner's Manual
NOTE: "A" n The assembly shown represents an Important pert of the Double Insulated System. To avoid
the poselbllity of alteration or damage to the System, service should be performed by your nearest Sears
Repair Center. Contact your nearest Sears Ratall Store.
*** Sanding discs In aseorted grits for sanding both wood and metal may be obtained from your nearset Ssere
Retail Store.
Page 13