Craftsman 358.352181 Operator's Manual page 6

KNOW YOUR SAW
RF.AD THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERAT-
ING YOUR CHAIN SAW Compare the illustrations with your unit to familiarize
yourself with the location of the various controls and adjustments. Save this
manual for future reference.
Bar Oil FillCap Housing Fuel Mix FillCap
Cylinder Cover [1
Fast Idle FL,JI
ThrottleL k
--,----- _ J t/_ Screw _ ulreCtlOn
_-.,-.,---- .,,.,- GuideBar "
Throttle Choke -- . BarClampNuts ui ear
T"ggor K.ob B ar O,amp
ON/STOP SWITCH
The ON/STOP Switchis usedto stop
the engine.
THRO'rFLETRIGGER
The throttle triggercontrolsengine
speed.
THROTTLE LOCKOUT
The throttle lockoutmustbe pressed
beforeyou cansqueezethe throttletrig-
ger.Thisfeature preventsyou from ac-
cidentallysqueezing the tdgger.
FAST IDLE LOCK
The fast idle lockholdsthethrottletrig-
ger in the starting position.Activatethe
fast idlelockby pressingthethrottle
lockout and squeezingthe throttletrig-
ger.Withthethrottletriggersqueezed,
press thefast idle lock.Release the
throttle lockout and trigger while holding
the fast idle lock button.
CHOKE KNOB
The Choke Knob activates the choke to
dprovide additional fuel to the engine
uring cold starting.
PRIMER BULB
The Primer Bulb circulates fuel to the
carburetor to provide quicker starting.
CHAIN TENSION
It is normal for a new chain to stretch
during first 30 minutes of operation. You
should check your chain tenston fre-
quently, See Chain Tension under the
Service and Adjustments section.
6