Canon PowerShot SX1 IS Software Starter Manual page 72

70
Using the Software on the Macintosh Platform – Advanced Techniques
Adding Original Start-Up Images or Sounds
You can add original start-up images or sounds created with image editing and other software
to the My Camera Window. Sound files are saved as WAVE-type files.
1
Double-click the [Applications] folder, followed by the [Canon Utilities] folder,
[CameraWindow] folder and the [MyCamera DC] icon.
The My Camera window will display.
2
Select the [Start-up Image] in Type.
For sound files, select either [Start-up Sound], [Operation Sound], [Selftimer Sound] or
[Shutter Sound].
3
Click [Add].
[Add] Button
Adds images and sound
files for use as settings
files in the list.
4
Select the file you created and click [Open].
This concludes the process for adding new data.
You can add the settings files you just added to the computer to the camera using the
same procedures as in Adding My Camera Settings to the Camera (p. 68).
Use the following settings to create start-up images or start-up sounds
using image editing software or sound processing software.
• Start-Up Images
Image Type
Data Sampling
Resolution (WxH)
• Start-Up Sounds
Type
Bit Rate / Frequency
Set the sound file length to values approximating those in the
following chart.
Type
Start-Up Sound
Shutter Sound
Operation Sound
Self-Timer Sound
: JPEG (Baseline JPEG)
: 4:2:0 or 4:2:2
: 320 x 240 or 512 x 288*
* Varies with camera model
: WAV (Monaural)
: 8 bits (11.025 kHz or 8.000 kHz)
Duration in Seconds
11.025 kHz
1.0 sec. or less
0.3 sec. or less
0.3 sec. or less
2.0 sec. or less
8.000 kHz
1.3 sec. or less
0.4 sec. or less
0.4 sec. or less
2.0 sec. or less