Using The Software On The Windows Platform - The Basics; Downloading Images To The Computer - Canon PowerShot SX1 IS Software Starter Manual

Using the Software on the Windows
This chapter explains the procedures for using ZoomBrowser EX to download the camera's
images to the computer and print them.
Proceed to this chapter after completing the preparations in the Using the Software on the
–
Windows Platform

Downloading Images to the Computer

Begin by downloading the images to your computer. The downloading procedure is slightly
different depending on whether you are using a camera to computer connection (see below) or
a memory card reader (p. 18).
• You may not be able to download images when the camera is connected to a
computer if there are a large number of images (approximately 1000) on the
memory card. Use a memory card reader to download in that case.
• Movie files take time to download since the files are large.
Camera to Computer Connection
1
After connecting the supplied interface cable to the computer's USB port and the
camera's DIGITAL terminal, turn on the camera power, set it to playback mode and
prepare it to communicate with the computer.
Methods for connecting the camera to the computer and placing the
camera in the correct mode for connecting vary between camera models.
See the Camera User Guide.
Platform – The Basics
Preparations section.
15